Hi, Did you first build the MB source tree (posted in the http://uefidk.com/ website) in debug mode and flash the debug image in the MinnowBoard? Also, ensure the [Debug Port] entry in the SoftDebugger.ini debugger file is set to the COM port that the MB uses when connected to the host machine. Here is what I have in mine -
[Debug Port] Channel = Serial Port = COM10 FlowControl = 0 BaudRate = 115200 And wrt the binary modules in the source tree, unfortunately there is no plan to provide them in source form at this time. Thanks, Elmer -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, May 26, 2014 6:29 PM To: [email protected] Subject: [MinnowBoard] Minnowboard and UDK debugger 1.4. Is anyone using the UDK debugger with the minnowboard (the $190 model)? The debugger does not connect the target for me. The target version is 1.3.1, as found in the provided uefi debug image (kit 1.0). Is this expected to work? I can provide a debugger log if needed. Also, is there a way to obtain the entire uefi source code for this kit? Quite a few modules are only provided in binary form, which makes it hard to track down issues, an inhibits learning. -- View this message in context: http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159.html Sent from the MinnowBoard mailing list archive at Nabble.com. _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
