Amaya, first, thanks for answering. I did both, and the result is exactly
the same. 1) I used the debug FW image provided in Intel's uefi dev kit. 2) I
rebuilt the debug image from source, and flashed it. The host debugger serial
port is configured correctly, because the debugger log shows a very early
attempt to connect with the target, followed by the many debug messages as the
target boots. I turned on tracing in the debugger configuration file. So my
questions are, 1) Is source level debugger supported on this board with the the
release uefi debug image and the sources in the latest udk debugger available
on the Intel web site(1.4)? I am asking because the target version in the log
shows 1.3.1. I used windows xp to build. 2) I can I obtain the full uefi
sourcr? Many of the important modules are binary only. There is uefi source
for some debugger components, but no dsc to use it. I think you've answered the
source question.
Sent from my BlackBerry Q10
smartphone.
From: Amaya, Elmer A [via MinnowBoard] Sent: Tuesday, May 27, 2014 10:51
AM To: [email protected] Subject: Re: [MinnowBoard] Minnowboard and UDK
debugger 1.4.
Hi,
Did you first build the MB source tree (posted in the http://uefidk.com/
website) in debug mode and flash the debug image in the MinnowBoard?
Also, ensure the [Debug Port] entry in the SoftDebugger.ini debugger file
is set to the COM port that the MB uses when connected to the host machine.
Here is what I have in mine -
[Debug Port]
Channel = Serial
Port = COM10
FlowControl = 0
BaudRate = 115200
And wrt the binary modules in the source tree, unfortunately there is no plan
to provide them in source form at this time.
Thanks,
Elmer
-----Original Message-----
From: [hidden email] [mailto: [hidden email] ] On Behalf Of [hidden email]
Sent: Monday, May 26, 2014 6:29 PM
To: [hidden email]
Subject: [MinnowBoard] Minnowboard and UDK debugger 1.4.
Is anyone using the UDK debugger with the minnowboard (the $190 model)? The
debugger does not connect the target for me. The target version is 1.3.1, as
found in the provided uefi debug image (kit 1.0). Is this expected to work?
I can provide a debugger log if needed.
Also, is there a way to obtain the entire uefi source code for this kit?
Quite a few modules are only provided in binary form, which makes it hard to
track down issues, an inhibits learning.
--
View this message in context:
http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159.html
Sent from the MinnowBoard mailing list archive at Nabble.com.
_______________________________________________
elinux-MinnowBoard mailing list
[hidden email]
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
[hidden email]
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
If you reply to this email, your message will be added to the
discussion below:
http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159p160.html
To unsubscribe from Minnowboard and UDK debugger 1.4., click
here .
NAML
--
View this message in context:
http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159p161.html
Sent from the MinnowBoard mailing list archive at Nabble.com._______________________________________________
elinux-MinnowBoard mailing list
[email protected]
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
