Let me rephrase my main question. Is anyone using the latest udk debugger with this board? Sent from my BlackBerry Q10 smartphone.
Amaya, first, thanks for answering. I did both, and the result is exactly the same. 1) I used the debug FW image provided in Intel's uefi dev kit. 2) I rebuilt the debug image from source, and flashed it. The host debugger serial port is configured correctly, because the debugger log shows a very early attempt to connect with the target, followed by the many debug messages as the target boots. I turned on tracing in the debugger configuration file. So my questions are, 1) Is source level debugger supported on this board with the the release uefi debug image and the sources in the latest udk debugger available on the Intel web site(1.4)? I am asking because the target version in the log shows 1.3.1. I used windows xp to build. 2) I can I obtain the full uefi sourcr? Many of the important modules are binary only. There is uefi source for some debugger components, but no dsc to use it. I think you've answered the source question. Sent from my BlackBerry Q10 smartphone.
Hi,
Did you first build the MB source tree (posted in the http://uefidk.com/ website) in debug mode and flash the debug image in the MinnowBoard? Also, ensure the [Debug Port] entry in the SoftDebugger.ini debugger file is set to the COM port that the MB uses when connected to the host machine. Here is what I have in mine - [Debug Port] Channel = Serial Port = COM10 FlowControl = 0 BaudRate = 115200 And wrt the binary modules in the source tree, unfortunately there is no plan to provide them in source form at this time. Thanks, Elmer -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of [hidden email] Sent: Monday, May 26, 2014 6:29 PM To: [hidden email] Subject: [MinnowBoard] Minnowboard and UDK debugger 1.4. Is anyone using the UDK debugger with the minnowboard (the $190 model)? The debugger does not connect the target for me. The target version is 1.3.1, as found in the provided uefi debug image (kit 1.0). Is this expected to work? I can provide a debugger log if needed. Also, is there a way to obtain the entire uefi source code for this kit? Quite a few modules are only provided in binary form, which makes it hard to track down issues, an inhibits learning. -- View this message in context: http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159.html Sent from the MinnowBoard mailing list archive at Nabble.com. _______________________________________________ elinux-MinnowBoard mailing list [hidden email] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [hidden email] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard If you reply to this email, your message will be added to the discussion below:
http://minnowboard.57273.x6.nabble.com/Minnowboard-and-UDK-debugger-1-4-tp159p160.html
View this message in context: Re: [MinnowBoard] Minnowboard and UDK debugger 1.4. Sent from the MinnowBoard mailing list archive at Nabble.com. | ||||
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
