Hello, I am directly connected through HDMI, and I'm using a monitor that has worked before. Even when the HDMI cable is not connected and I try accessing it via serial connection the board still doesn't attempt to boot.
On Oct 26, 2014, at 11:34 AM, Thiago Tenório Jordão de Vasconcelos <[email protected]<mailto:[email protected]>> wrote: Hi steven, Have you tryed changing the monitor? Are you connecting direct through HDMI or using some sort of adapter? Thiago Vasconcelos On Sat, Oct 25, 2014 at 3:29 PM, Rangel, Steven H <[email protected]<mailto:[email protected]>> wrote: Hello, My name is Steven and I recently purchased a MinnowBoard MAX. After receiving my minnow board MAX I discovered that it has an issue booting up. There is no video output, both LEDs are lit up, and the only serial output is: >>>>SecStartup >>>>MemoryInit Done At first I thought it was a problem with the firmware so I purchased the DediProg SF100, but even after flashing it with the latest firmware there was no change. Now I am out of ideas on how to fix it. I believe that I have received a defective board. Is there any way I can send it my minnowboard MAX for a replacement? I'm also willing to try any ideas anyone may have on how to fix it. I am currently a college student and I have invested a lot of money into this so any help would be greatly appreciated. Steven _______________________________________________ elinux-MinnowBoard mailing list [email protected]<mailto:[email protected]> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected]<mailto:[email protected]> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
