Yes I'm using a monitor that has worked before with a minnowboard MAX. It just says 'no signal'. I believe i have the firmware bug described on the minnowboard max wiki page. Seen here: ---------- Firmware ________________________________
See the bug list, linked above. ________________________________ There are some reports of corruption of the UEFI firmware Symptoms are no display, 2 leds on, and this serial<http://www.elinux.org/index.php?title=Serial&action=edit&redlink=1> output trace : >>>>SecStartup >>>>MemoryInit Done >>>>BdsEntry This should be resolved in firmware's after 8/13/2014 ---------- I my board has all of these symptoms, but even after updating the firmware via SPI there is still no change. steven ________________________________ From: elinux-MinnowBoard [[email protected]] on behalf of Thiago Tenório Jordão de Vasconcelos [[email protected]] Sent: Sunday, October 26, 2014 11:52 AM To: MinnowBoard Development and Community Discussion Cc: MinnowBoard Development and Community Discussion Subject: Re: [MinnowBoard] Defective Minnowboard? The monitor worked before with the Minnowboard Max? For example, I have here a monitor from my old Notebook using a board with HDMI. It just work if I turn the monitor ON and for a short time before it realizes that there is nothing connected, I turn the minnowboard ON. Try on a TV after you select the HDMI port. Atenciosamente, Thiago Vasconcelos -- Programador Web Portfolio: http://thiagottjv.com<http://thiagottjv.com/> Fone:+55-81-96320562 On Sun, Oct 26, 2014 at 12:44 PM, Rangel, Steven H <[email protected]<mailto:[email protected]>> wrote: Hello, I am directly connected through HDMI, and I'm using a monitor that has worked before. Even when the HDMI cable is not connected and I try accessing it via serial connection the board still doesn't attempt to boot. On Oct 26, 2014, at 11:34 AM, Thiago Tenório Jordão de Vasconcelos <[email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>>> wrote: Hi steven, Have you tryed changing the monitor? Are you connecting direct through HDMI or using some sort of adapter? Thiago Vasconcelos On Sat, Oct 25, 2014 at 3:29 PM, Rangel, Steven H <[email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>>> wrote: Hello, My name is Steven and I recently purchased a MinnowBoard MAX. After receiving my minnow board MAX I discovered that it has an issue booting up. There is no video output, both LEDs are lit up, and the only serial output is: >>>>SecStartup >>>>MemoryInit Done At first I thought it was a problem with the firmware so I purchased the DediProg SF100, but even after flashing it with the latest firmware there was no change. Now I am out of ideas on how to fix it. I believe that I have received a defective board. Is there any way I can send it my minnowboard MAX for a replacement? I'm also willing to try any ideas anyone may have on how to fix it. I am currently a college student and I have invested a lot of money into this so any help would be greatly appreciated. Steven _______________________________________________ elinux-MinnowBoard mailing list [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected]<mailto:[email protected]> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard _______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
