Also, if it does not BIOS, I can compile firmware based on this link https://github.com/tianocore/tianocore.github.io/wiki/EDK-II?
Thank you very much for your time On Thu, Jul 12, 2018 at 8:59 PM zahra rahimkhani <zrahimkhani2...@gmail.com> wrote: > Thank you very much for this message. > > > 1. How did you perform the upgrade from 0.77 to 0.91? > > I used this link for upgrade > https://minnowboard.org/tutorials/updating-the-firmware > I typed that commands on shell . > > 2.Please explain the “crash” you see after the firmware boot > message? Is this FreeBSD crashing after it tries to boot, or a different > error? > No, it is without FreeBSD, It does not make Shell. I did not see this > message: EFI shell version..... > > 3. Can you use F2/DEL to enter the firmware setup without a > crash/hang? > No, when I see this message " Start boot option, Press <F2> or <DEL> to > enter setup page(5 Sec)...." > My keyboard does not work and I did not see shell that type new commands > > 4. The MinnowBoard Max/Turbot firmware is UEFI only, with no > legacy BIOS support. Newer versions of FreeBSD have UEFI support. > > I need FreeBSD 9.2 It does not UEFI , In the forums, I saw in new > versions, it has BIOS that in this link for 9.1 it told that it has BIOS. > > https://firmware.intel.com/projects/minnowboard-max > > > Thanks > > > On Thu, Jul 12, 2018 at 8:19 PM Richardson, Brian < > brian.richard...@intel.com> wrote: > >> >> 1. How did you perform the upgrade from 0.77 to 0.91? >> 2. Please explain the “crash” you see after the firmware boot >> message? Is this FreeBSD crashing after it tries to boot, or a different >> error? >> 3. Can you use F2/DEL to enter the firmware setup without a >> crash/hang? >> 4. The MinnowBoard Max/Turbot firmware is UEFI only, with no legacy >> BIOS support. Newer versions of FreeBSD have UEFI support. >> >> >> >> Thanks … br >> >> --- >> >> Brian Richardson, Senior Technical Marketing Engineer, Intel Software >> >> brian.richard...@intel.com -- @intel_brian (Twitter & WeChat) >> >> >> https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson >> >> >> >> *From:* elinux-MinnowBoard <elinux-minnowboard-boun...@lists.elinux.org> *On >> Behalf Of *zahra rahimkhani >> *Sent:* Thursday, July 12, 2018 5:05 AM >> *To:* MinnowBoard Development and Community Discussion < >> elinux-minnowboard@lists.elinux.org> >> *Subject:* [MinnowBoard] firmware with Bios for minnowboard max >> >> >> >> Dear Friends >> >> >> >> I downloaded firmware of MinnowBoard MAX 0.91 64-Bit because I think >> it have BIOS and I can use freebsd 9.2 that do not support UEFI. >> >> I put it on my chip but it show this message . >> >> ">>>>Start boot option, Press <F2> or <DEL> to enter setup page(5 >> Sec)....." >> >> and crashed . I can not type anything in this stage. >> >> >> >> I would be grateful if you let me know how solve it ? >> >> My board had version 0.77 before. >> >> >> >> Best wishes, >> _______________________________________________ >> elinux-MinnowBoard mailing list >> elinux-MinnowBoard@lists.elinux.org >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >
_______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org http://lists.elinux.org/mailman/listinfo/elinux-minnowboard