Hi Zahra, try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard.
It starts Windows! It is based on UDK2018 and firmware 1.0 and is created on a Windows PC, installed like that one: https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC Why you are using the old FW? That old FW is not available on the Intel MinnowBoard site anymore! https://firmware.intel.com/projects/minnowboard-max Regards, Kilian ________________________________ From: elinux-MinnowBoard <elinux-minnowboard-boun...@lists.elinux.org> on behalf of zahra rahimkhani <zrahimkhani2...@gmail.com> Sent: Saturday, April 6, 2019 6:36:45 AM To: MinnowBoard Development and Community Discussion Subject: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max Hello, I am trying to use Debug 0.94 Firmware on Minnowboard Max. I use the SPI programmer to do the initial programming. it shows the follow message. MmioConf0[0xFED0E200], MmioPadval[0xFED0E208] Gpio_S5_4 value is 0x3 Gpio_S5_17 value is 0x2 MultiPlatformGpioTableInit()... ASSERT_EFI_ERROR (Status = Not Found) ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status) Best regards, Zahra
_______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
