I downloaded this document MinnowBoard Max/Turbot 1.00 Release Notes <https://firmware.intel.com/sites/default/files/minnowboard_max-rel_1_00-releasenotes.txt> and used this part
HOW TO BUILD (LINUX ENVIRONMENT) and compiled it on my system. could you help me how I can solve this error on output of file .bin ? The message on file bin spi flash was this MmioConf0[0xFED0E200], MmioPadval[0xFED0E208] Gpio_S5_4 value is 0x3 Gpio_S5_17 value is 0x2 MultiPlatformGpioTableInit()... ASSERT_EFI_ERROR (Status = Not Found) ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status) I find this BoardGpios.c on source .but i dont know how solve it ? Best regards , Zahra On Sat, Apr 6, 2019 at 11:13 AM zahra rahimkhani <zrahimkhani2...@gmail.com> wrote: > Thank you for your reply . > I need Intel I210/I211 network driver. I used version 0.98 and it shows > this message. > > Do you think that should change it ? > > > > On Sat, Apr 6, 2019 at 11:00 AM Minnow Ware <minnoww...@hotmail.com> > wrote: > >> Hi Zahra, >> >> >> >> try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard. >> >> >> >> It starts Windows! >> >> >> >> It is based on UDK2018 and firmware 1.0 and is created on a Windows PC, >> installed like that one: >> >> https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC >> >> >> >> Why you are using the old FW? >> >> That old FW is not available on the Intel MinnowBoard site anymore! >> >> https://firmware.intel.com/projects/minnowboard-max >> >> >> >> >> >> Regards, >> >> Kilian >> >> >> ------------------------------ >> *From:* elinux-MinnowBoard <elinux-minnowboard-boun...@lists.elinux.org> >> on behalf of zahra rahimkhani <zrahimkhani2...@gmail.com> >> *Sent:* Saturday, April 6, 2019 6:36:45 AM >> *To:* MinnowBoard Development and Community Discussion >> *Subject:* [MinnowBoard] problem with 0.94 firmware for Minnowboard Max >> >> Hello, >> I am trying to use Debug 0.94 Firmware on Minnowboard Max. I use the >> SPI programmer to do the initial programming. it shows the follow message. >> >> MmioConf0[0xFED0E200], MmioPadval[0xFED0E208] >> Gpio_S5_4 value is 0x3 >> Gpio_S5_17 value is 0x2 >> MultiPlatformGpioTableInit()... >> >> ASSERT_EFI_ERROR (Status = Not Found) >> ASSERT >> m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): >> !EFI_ERROR (Status) >> >> >> Best regards, >> Zahra >> >> _______________________________________________ >> elinux-MinnowBoard mailing list >> elinux-MinnowBoard@lists.elinux.org >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard >> >
_______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org http://lists.elinux.org/mailman/listinfo/elinux-minnowboard