Hi Zarah, just remove that lines from the source code.
Looks to me that the board variant is identified there, by checking how pins are strapped with resistors, but I don’t have your sourcecode. Use my tool to get familiar with Baytrail GPIO’s. https://github.com/MinnowWare/Visual-HWTools-for-UEFI-Shell/tree/master/x64/Efi64\BYTGPIOSpy.efi<https://github.com/MinnowWare/Visual-HWTools-for-UEFI-Shell/tree/master/x64/Efi64/BYTGPIOSpy.efi> Don’t use the old sourcecode! Regards, Kilian ________________________________ From: elinux-MinnowBoard <elinux-minnowboard-boun...@lists.elinux.org> on behalf of zahra rahimkhani <zrahimkhani2...@gmail.com> Sent: Monday, April 8, 2019 11:12:03 AM To: MinnowBoard Community Email List Subject: Re: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max I downloaded this document MinnowBoard Max/Turbot 1.00 Release Notes<https://firmware.intel.com/sites/default/files/minnowboard_max-rel_1_00-releasenotes.txt> and used this part HOW TO BUILD (LINUX ENVIRONMENT) and compiled it on my system. could you help me how I can solve this error on output of file .bin ? The message on file bin spi flash was this MmioConf0[0xFED0E200], MmioPadval[0xFED0E208] Gpio_S5_4 value is 0x3 Gpio_S5_17 value is 0x2 MultiPlatformGpioTableInit()... ASSERT_EFI_ERROR (Status = Not Found) ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status) I find this BoardGpios.c on source .but i dont know how solve it ? Best regards , Zahra On Sat, Apr 6, 2019 at 11:13 AM zahra rahimkhani <zrahimkhani2...@gmail.com<mailto:zrahimkhani2...@gmail.com>> wrote: Thank you for your reply . I need Intel I210/I211 network driver. I used version 0.98 and it shows this message. Do you think that should change it ? On Sat, Apr 6, 2019 at 11:00 AM Minnow Ware <minnoww...@hotmail.com<mailto:minnoww...@hotmail.com>> wrote: Hi Zahra, try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard. It starts Windows! It is based on UDK2018 and firmware 1.0 and is created on a Windows PC, installed like that one: https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC Why you are using the old FW? That old FW is not available on the Intel MinnowBoard site anymore! https://firmware.intel.com/projects/minnowboard-max Regards, Kilian ________________________________ From: elinux-MinnowBoard <elinux-minnowboard-boun...@lists.elinux.org<mailto:elinux-minnowboard-boun...@lists.elinux.org>> on behalf of zahra rahimkhani <zrahimkhani2...@gmail.com<mailto:zrahimkhani2...@gmail.com>> Sent: Saturday, April 6, 2019 6:36:45 AM To: MinnowBoard Development and Community Discussion Subject: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max Hello, I am trying to use Debug 0.94 Firmware on Minnowboard Max. I use the SPI programmer to do the initial programming. it shows the follow message. MmioConf0[0xFED0E200], MmioPadval[0xFED0E208] Gpio_S5_4 value is 0x3 Gpio_S5_17 value is 0x2 MultiPlatformGpioTableInit()... ASSERT_EFI_ERROR (Status = Not Found) ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status) Best regards, Zahra _______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org<mailto:elinux-MinnowBoard@lists.elinux.org> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________ elinux-MinnowBoard mailing list elinux-MinnowBoard@lists.elinux.org http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
