Adrian et al, On 22 Jul 2008, at 09:41, David Reitter wrote:
The main changes are that we check cursor_type instead of cursorType and draw the text glyph rather than the cursor when erasing anything (`hl' variable). There's a range of steps that we do to ensure that the cursor area is actually visible; I'm not sure if they are really needed, but the corresponding X code does it, too. There is a good bit of guess-work involved, but I'm sure that testing will take care of any problems.
OK, in my latest build, things work a lot better and the original blink-cursor-mode appears to work fine now. (I don't quite understand which change made the event mechanisms work better.)
To repeat, these changes address the following issues:- frame background rather than the right glyph in the white-out phases during blinking - `cursor-type' variable as in core Emacs, rather than NS specific solution
- with it, support for things like (box . 2) - box/hollow cursors too narrow- standard blink-cursor-mode with all its bells and whistles (whether one needs them or not)
I would also take the blink rate stuff out of the preferences (a patch to the nib) - it doesn't work with the generic blinking code and I believe it's there for historic reasons (because the NS port implemented blinking separately) rather than because it would be very important to have for users (one could think of much more important settings that could be there).
ns_set_cursor_type is now equivalent to the x_set_cursor_type (quasi) generic. I left ns_set_cursor_color for you or someone else.
The occasional ghost cursors seem to remain. Any objections? D Index: nsterm.m =================================================================== RCS file: /sources/emacs/emacs/src/nsterm.m,v retrieving revision 1.23 diff -c -r1.23 nsterm.m *** nsterm.m 5 Aug 2008 03:05:14 -0000 1.23 --- nsterm.m 20 Aug 2008 05:18:41 -0000 *************** *** 168,180 ****the Function modifer (laptops). May be any of the modifier lisp symbols. */
Lisp_Object ns_function_modifier;- /* A floating point value specifying the rate at which to blink the cursor.
- YES indicates 0.5, NO indicates no blinking. */ - Lisp_Object ns_cursor_blink_rate; - - /* Used for liason with core emacs cursor-blink-mode. */ - Lisp_Object ns_cursor_blink_mode; -/* A floating point value specifying vertical stretch (positive) or shrink
(negative) of text line spacing. Zero means default spacing.
YES indicates 0.5, NO indicates 0.0. */
--- 168,173 ----
***************
*** 235,241 ****
static NSEvent *last_appdefined_event = 0;
static NSTimer *timed_entry = 0;
static NSTimer *fd_entry = nil;
- static NSTimer *cursor_blink_entry = nil;
static NSTimer *scroll_repeat_entry = nil;
static fd_set select_readfds, t_readfds;
static struct timeval select_timeout;
--- 228,233 ----
***************
*** 2270,2275 ****
--- 2262,2271 ----
int on_p, int active_p)
/*
--------------------------------------------------------------------------
External call (RIF): draw cursor
+ (modeled after x_draw_window_cursor and erase_phys_cursor.
+ FIXME: erase_phys_cursor is called from display_and_set_cursor,
+ called from update_window_cursor/x_update_window_end/...
+ Why do we have to duplicate this code?
-------------------------------------------------------------------------- */
{
NSRect r, s;
***************
*** 2278,2291 ****
struct glyph *phys_cursor_glyph;
int overspill;
unsigned char drawGlyph = 0, cursorType, oldCursorType;
NSTRACE (dumpcursor);
! if (!on_p)
return;
w->phys_cursor_type = cursor_type;
! w->phys_cursor_on_p = 1;
if (cursor_type == NO_CURSOR)
{
--- 2274,2296 ----
struct glyph *phys_cursor_glyph;
int overspill;
unsigned char drawGlyph = 0, cursorType, oldCursorType;
+ int new_cursor_type;
+ int new_cursor_width;
+ int active_cursor;
+ enum draw_glyphs_face hl;
+ struct glyph_matrix *active_glyphs = w->current_matrix;
+ Display_Info *dpyinfo = FRAME_X_DISPLAY_INFO (f);
+ int hpos = w->phys_cursor.hpos;
+ int vpos = w->phys_cursor.vpos;
+ struct glyph_row *cursor_row;
NSTRACE (dumpcursor);
! if (!on_p) // check this? && !w->phys_cursor_on_p)
return;
w->phys_cursor_type = cursor_type;
! w->phys_cursor_on_p = on_p;
if (cursor_type == NO_CURSOR)
{
***************
*** 2318,2326 ****
if (overspill > 0)
r.size.width -= overspill;
- /* TODO: 23: use emacs stored f->cursor_type instead of ns-
specific */
oldCursorType = FRAME_CURSOR (f);
cursorType = FRAME_CURSOR (f) = FRAME_NEW_CURSOR (f);
f->output_data.ns->current_cursor_color
= f->output_data.ns->desired_cursor_color;
--- 2323,2332 ----
if (overspill > 0)
r.size.width -= overspill;
oldCursorType = FRAME_CURSOR (f);
cursorType = FRAME_CURSOR (f) = FRAME_NEW_CURSOR (f);
+
+ /* TODO: 23: use emacs stored cursor color instead of ns-specific */
f->output_data.ns->current_cursor_color
= f->output_data.ns->desired_cursor_color;
***************
*** 2342,2392 ****
if (cursorType == no_highlight || cursor_type == NO_CURSOR)
{
/* clearing for blink: erase the cursor itself */
[FRAME_BACKGROUND_COLOR (f) set];
! cursorType = oldCursorType; /* just clear what we had before */
}
else
[FRAME_CURSOR_COLOR (f) set];
! if (!active_p)
! {
! /* inactive window: ignore what we just set and use a hollow
box */
! cursorType = hollow_box;
! [FRAME_CURSOR_COLOR (f) set];
! }
! switch (cursorType)
! {
! case no_highlight:
! break;
! case filled_box:
! NSRectFill (r);
! drawGlyph = 1;
! break;
! case hollow_box:
! NSRectFill (r);
! [FRAME_BACKGROUND_COLOR (f) set];
! NSRectFill (NSInsetRect (r, 1, 1));
! [FRAME_CURSOR_COLOR (f) set];
! drawGlyph = 1;
! break;
! case underscore:
! s = r;
! s.origin.y += lrint (0.75 * s.size.height);
! s.size.height = lrint (s.size.height * 0.25);
! NSRectFill (s);
! break;
! case bar:
! s = r;
! s.size.width = 1;
! NSRectFill (s);
! break;
}
ns_unfocus (f);
/* if needed, draw the character under the cursor */
if (drawGlyph)
! draw_phys_cursor_glyph (w, glyph_row, DRAW_CURSOR);
}
--- 2348,2472 ----
if (cursorType == no_highlight || cursor_type == NO_CURSOR)
{
/* clearing for blink: erase the cursor itself */
+
+ /* No cursor displayed or row invalidated => nothing to do on
the
+ screen. */ + if (w->phys_cursor_type == NO_CURSOR) + return; ++ /* VPOS >= active_glyphs->nrows means that window has been resized.
+ Don't bother to erase the cursor. */ + if (vpos >= active_glyphs->nrows) + return; ++ /* If row containing cursor is marked invalid, there is nothing we
+ can do. */ + cursor_row = MATRIX_ROW (active_glyphs, vpos); + if (!cursor_row->enabled_p) + return; ++ /* If line spacing is > 0, old cursor may only be partially visible in
+ window after split-window. So adjust visible height. */ + cursor_row->visible_height = min (cursor_row->visible_height, + window_text_bottom_y (w) - cursor_row->y); ++ /* If row is completely invisible, don't attempt to delete a cursor which
+ isn't there. This can happen if cursor is at top of a window, and + we switch to a buffer with a header line in that window. */ + if (cursor_row->visible_height <= 0) + return; ++ /* If cursor is in the fringe, erase by drawing actual bitmap there. */
+ if (cursor_row->cursor_in_fringe_p)
+ {
+ cursor_row->cursor_in_fringe_p = 0;
+ draw_fringe_bitmap (w, cursor_row, 0);
+ return;
+ }
+
+ /* This can happen when the new row is shorter than the old one.
+ In this case, either draw_glyphs or clear_end_of_line
+ should have cleared the cursor. Note that we wouldn't be
+ able to erase the cursor in this case because we don't have a
+ cursor glyph at hand. */
+ if (w->phys_cursor.hpos >= cursor_row->used[TEXT_AREA])
+ return;
+
+ /* If the cursor is in the mouse face area, redisplay that when
+ we clear the cursor. */
+ if (! NILP (dpyinfo->mouse_face_window)
+ && w == XWINDOW (dpyinfo->mouse_face_window)
+ && (vpos > dpyinfo->mouse_face_beg_row
+ || (vpos == dpyinfo->mouse_face_beg_row
+ && hpos >= dpyinfo->mouse_face_beg_col))
+ && (vpos < dpyinfo->mouse_face_end_row
+ || (vpos == dpyinfo->mouse_face_end_row
+ && hpos < dpyinfo->mouse_face_end_col))
+ /* Don't redraw the cursor's spot in mouse face if it is at the
+ end of a line (on a newline). The cursor appears there, but
+ mouse highlighting does not. */
+ && cursor_row->used[TEXT_AREA] > hpos)
+ hl = DRAW_MOUSE_FACE;
+ else
+ hl = DRAW_NORMAL_TEXT;
+ drawGlyph = 1; // just draw the Glyph
[FRAME_BACKGROUND_COLOR (f) set];
!
! NSDisableScreenUpdates ();
}
else
+ {
+ cursorType = cursor_type;
+ hl = DRAW_CURSOR;
[FRAME_CURSOR_COLOR (f) set];
+
! if (!active_p)
! {
! /* inactive window: ignore what we just set and use a hollow box */
! cursorType = hollow_box;
! [FRAME_CURSOR_COLOR (f) set];
! }
! NSDisableScreenUpdates ();
!
! switch (cursorType)
! {
! case NO_CURSOR: // no_highlight:
! break;
! case FILLED_BOX_CURSOR: //filled_box:
! NSRectFill (r);
! drawGlyph = 1;
! break;
! case HOLLOW_BOX_CURSOR: //hollow_box:
! NSRectFill (r);
! [FRAME_BACKGROUND_COLOR (f) set];
! NSRectFill (NSInsetRect (r, 1, 1));
! [FRAME_CURSOR_COLOR (f) set];
! drawGlyph = 1;
! break;
! case HBAR_CURSOR: // underscore:
! s = r;
! s.origin.y += lrint (0.75 * s.size.height);
! s.size.height = cursor_width; //lrint (s.size.height * 0.25);
! NSRectFill (s);
! break;
! case BAR_CURSOR: //bar:
! s = r;
! s.size.width = cursor_width;
! NSRectFill (s);
! drawGlyph = 1;
! break;
! }
}
ns_unfocus (f);
/* if needed, draw the character under the cursor */
if (drawGlyph)
! draw_phys_cursor_glyph (w, glyph_row, hl);
!
! NSEnableScreenUpdates ();
!
}
***************
*** 3173,3207 ****
repeats: YES]
retain];
- if (!NILP (ns_cursor_blink_mode) && !cursor_blink_entry)
- {
- if (!NUMBERP (ns_cursor_blink_rate))
- ns_cursor_blink_rate = make_float (0.5);
- cursor_blink_entry = [[NSTimer
- scheduledTimerWithTimeInterval: XFLOATINT
(ns_cursor_blink_rate)
- target: NSApp- selector: @selector (cursor_blink_handler:)
- userInfo: 0
- repeats: YES]
- retain];
- }
- else if (NILP (ns_cursor_blink_mode) && cursor_blink_entry)
- {
- if (NUMBERP (ns_cursor_blink_rate))
- ns_cursor_blink_rate = Qnil;
- struct ns_display_info *dpyinfo = x_display_list; /* HACK */
- [cursor_blink_entry invalidate];
- [cursor_blink_entry release];
- cursor_blink_entry = 0;
- if (dpyinfo->x_highlight_frame)
- {
- Lisp_Object tem
- = get_frame_param (dpyinfo->x_highlight_frame, Qcursor_type);
- dpyinfo->x_highlight_frame->output_data.ns->desired_cursor
- = ns_lisp_to_cursor_type (tem);
- }
- }
-
/* Let Application dispatch events until it receives an event of
the type
NX_APPDEFINED, which should only be sent by
timeout_handler. */
inNsSelect = 1;
--- 3253,3258 ----
***************
*** 3487,3494 ****
ns_command_modifier = Qsuper;
ns_control_modifier = Qcontrol;
ns_function_modifier = Qnone;
- ns_cursor_blink_rate = Qnil;
- ns_cursor_blink_mode = Qnil;
ns_expand_space = make_float (0.0);
ns_antialias_text = Qt;
ns_antialias_threshold = 10.0; /* not exposed to lisp side */
--- 3538,3543 ----
***************
*** 3795,3804 ****
Qnil, Qnil, NO, YES);
if (NILP (ns_function_modifier))
ns_function_modifier = Qnone;
- ns_default ("CursorBlinkRate", &ns_cursor_blink_rate,
- make_float (0.5), Qnil, YES, NO);
- if (NUMBERP (ns_cursor_blink_rate))
- ns_cursor_blink_mode = Qt;
ns_default ("ExpandSpace", &ns_expand_space,
make_float (0.5), make_float (0.0), YES, NO);
ns_default ("GSFontAntiAlias", &ns_antialias_text,
--- 3844,3849 ----
***************
*** 4194,4224 ****
extern void update_window_cursor (struct window *w, int on);
- - (void)cursor_blink_handler: (NSTimer *)cursorEntry
- /*
--------------------------------------------------------------------------
- Flash the cursor- -------------------------------------------------------------------------- */
- {
- struct ns_display_info *dpyinfo = x_display_list; /*HACK, but OK
for now */
- struct frame *f = dpyinfo->x_highlight_frame;
- NSTRACE (cursor_blink_handler);
-
- if (!f)
- return;
- if (f->output_data.ns->current_cursor == no_highlight)
- {
- Lisp_Object tem = get_frame_param (f, Qcursor_type);
- f->output_data.ns->desired_cursor = ns_lisp_to_cursor_type
(tem);
- }
- else
- {
- f->output_data.ns->desired_cursor = no_highlight;
- }
- update_window_cursor (XWINDOW (FRAME_SELECTED_WINDOW (f)), 1);
- /*x_update_cursor (f, 1); */
- }
-
-
- (void)fd_handler: (NSTimer *) fdEntry
/*
--------------------------------------------------------------------------
Check data waiting on file descriptors and terminate if so
--- 4239,4244 ----
***************
*** 6025,6039 ****
int cursorType
= ns_lisp_to_cursor_type (get_frame_param (frame, Qcursor_type));
prevExpandSpace = XFLOATINT (ns_expand_space);
- prevBlinkRate = NILP (ns_cursor_blink_rate)
- ? 0 : XFLOATINT (ns_cursor_blink_rate);
#ifdef NS_IMPL_COCOA
prevUseHighlightColor = ns_use_system_highlight_color;
#endif
[expandSpaceSlider setFloatValue: prevExpandSpace];
- [cursorBlinkSlider setFloatValue: prevBlinkRate];
[cursorTypeMatrix selectCellWithTag: (cursorType == filled_box ?
1 :
(cursorType == bar ? 2 :
(cursorType ==
underscore ? 3 : 4)))];
--- 6045,6056 ----
***************
*** 6062,6070 ****
int ctrlTag = [[controlModMenu selectedItem] tag];
int fnTag = [[functionModMenu selectedItem] tag];
#endif
- float blinkRate = [cursorBlinkSlider floatValue];
float expandSpace = [expandSpaceSlider floatValue];
- Lisp_Object old_cursor_blink_mode;
if (expandSpace != prevExpandSpace)
{
--- 6079,6085 ----
***************
*** 6075,6112 ****
x_set_window_size (frame, 0, frame->text_cols, frame-
>text_lines); */
prevExpandSpace = expandSpace;
}
- if (blinkRate != prevBlinkRate)
- {
- old_cursor_blink_mode = ns_cursor_blink_mode;
- if (blinkRate == 0.0)
- {
- ns_cursor_blink_rate = Qnil;
- ns_cursor_blink_mode = Qnil;
- }
- else
- {
- ns_cursor_blink_rate = make_float (blinkRate);
- ns_cursor_blink_mode = Qt;
- }
- if (!EQ (ns_cursor_blink_mode, old_cursor_blink_mode))
- Feval (Fcons (intern ("blink-cursor-mode"), Qnil));
-
- if (blinkRate != 0.0 && prevBlinkRate != 0.0)
- { /* if changed rates, remove blink handler so change
picked up */
- struct ns_display_info *dpyinfo = FRAME_NS_DISPLAY_INFO
(frame);
- [cursor_blink_entry invalidate];
- [cursor_blink_entry release];
- cursor_blink_entry = 0;
- if (dpyinfo->x_highlight_frame)
- {
- Lisp_Object tem
- = get_frame_param (dpyinfo->x_highlight_frame, Qcursor_type);
- dpyinfo->x_highlight_frame->output_data.ns-
>desired_cursor
- = ns_lisp_to_cursor_type (tem);
- }
- }
- prevBlinkRate = blinkRate;
- }
FRAME_NEW_CURSOR (frame)
= (cursorTag == 1 ? filled_box
: cursorTag == 2 ? bar
--- 6090,6095 ----
***************
*** 6419,6432 ****
Set to none means that the function key is not interpreted by Emacs
at all,\n\
allowing it to be used at a lower level for accented character
entry.");
- DEFVAR_LISP ("ns-cursor-blink-rate", &ns_cursor_blink_rate,
- "Rate at which the Emacs cursor blinks (in seconds).\n\
- Set to nil to disable blinking.");
-
- DEFVAR_LISP ("ns-cursor-blink-mode", &ns_cursor_blink_mode,
- "Internal variable -- use M-x blink-cursor-mode or
preferences\n\
- panel to control this setting.");
-
DEFVAR_LISP ("ns-expand-space", &ns_expand_space,
"Amount by which spacing between lines is expanded
(positive)\n\
or shrunk (negative). Zero (the default) means standard line
height.\n\
--- 6402,6407 ----
*** nsfns.m 09 Aug 2008 04:37:53 -0400 1.20
--- nsfns.m 19 Aug 2008 13:36:53 -0400
***************
*** 412,417 ****
--- 412,418 ----
}
}
+ /* FIXME: adapt to generics */
static void
ns_set_cursor_color (struct frame *f, Lisp_Object arg, Lisp_Object
oldval)
***************
*** 435,440 ****
--- 436,453 ----
update_face_from_frame_parameter (f, Qcursor_color, arg);
}
+ /* this is like x_set_cursor_type defined in xfns.c */
+ void
+ ns_set_cursor_type (f, arg, oldval)
+ FRAME_PTR f;
+ Lisp_Object arg, oldval;
+ {
+ set_frame_cursor_types (f, arg);
+
+ /* Make sure the cursor gets redrawn. */
+ cursor_type_changed = 1;
+ }
+
static void
ns_set_icon_name (struct frame *f, Lisp_Object arg, Lisp_Object
oldval)
*************** *** 929,954 **** } - static void- ns_set_cursor_type (struct frame *f, Lisp_Object arg, Lisp_Object oldval)
- {
- int val;
-
- val = ns_lisp_to_cursor_type (arg);
- if (val >= 0)
- {
- f->output_data.ns->desired_cursor =val;
- }
- else
- {
- store_frame_param (f, Qcursor_type, oldval);
- error ("the `cursor-type' frame parameter should be either
`no', `box', \
- `hollow', `underscore' or `bar'."); - } - - update_mode_lines++; - } -/* 23: called to set mouse pointer color, but all other terms use it to
initialize pointer types (and don't set the color ;) */
--- 942,947 ----
*** ns-win.el 18 Aug 2008 12:23:42 -0400 1.24
--- ns-win.el 19 Aug 2008 12:42:35 -0400
***************
*** 59,65 ****
;; nsterm.m
(defvar ns-version-string)
(defvar ns-expand-space)
- (defvar ns-cursor-blink-rate)
(defvar ns-alternate-modifier)
;;;; Command line argument handling.
--- 59,64 ----
***************
*** 995,1004 ****
(ns-set-resource nil "CommandModifier" (symbol-name ns-command-
modifier))
(ns-set-resource nil "ControlModifier" (symbol-name ns-control-
modifier))
(ns-set-resource nil "FunctionModifier" (symbol-name ns-function-
modifier))
- (ns-set-resource nil "CursorBlinkRate"
- (if ns-cursor-blink-rate
- (number-to-string ns-cursor-blink-rate)
- "NO"))
(ns-set-resource nil "ExpandSpace"
(if ns-expand-space
(number-to-string ns-expand-space)
--- 994,999 ----
***************
*** 1228,1257 ****
0 1)) ))
(if (not tool-bar-mode) (tool-bar-mode t)))
- (defvar ns-cursor-blink-mode) ; nsterm.m
-
- ;; Redefine from frame.el.
- (define-minor-mode blink-cursor-mode
- "Toggle blinking cursor mode.
- With a numeric argument, turn blinking cursor mode on if ARG is
positive,
- otherwise turn it off. When blinking cursor mode is enabled, the - cursor of the selected window blinks. - - Note that this command is effective only when Emacs - displays through a window system, because then Emacs does its own - cursor display. On a text-only terminal, this is not implemented." - :init-value (not (or noninteractive - no-blinking-cursor - (eq ns-cursor-blink-rate nil))) - :initialize 'custom-initialize-safe-default - :group 'cursor - :global t - (if blink-cursor-mode - (setq ns-cursor-blink-mode t) - (setq ns-cursor-blink-mode nil))) - - - ;;;; Dialog-related functions. ;; Ask user for confirm before printing. Due to Kevin Rodgers. --- 1223,1228 ----
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________ Emacs-app-dev- mailing list Emacs-app-dev-@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emacs-app-dev-
