Just a trivial change to the appended change:
T99999 P99999 Z+0.100000 ;big tool number
should be
T99999 P99999 D0.100000 Z+0.000000 ;big tool number
This follows the format of the rest of the examples that were noted for
change. Sorry for being nit-picky, but if this is going into the docs I
figure it should be caught now.
EBo --
John Thornton <[email protected]> said:
> Michael,
>
> Thanks for the info for the Docs. This makes it so easy to update them. :)
>
> John Thornton
>
> On 1/25/2010 4:39 PM, micges wrote:
> > Hello,
> >
> > Today I've merged tlo_all_axes into master development branch.
> > On this branch tool length offset was extended to all nine axes.
> > This brings major change to tool table format to hold those additional
> > values.
> > Old tool tables will not load any more.
> > For example, old tool table:
> >
> > TOOLNO POCKET LENGTH DIAMETER COMMENT
> >
> > 1 1 +0.511000 0.125000 1/8 end mill
> > 2 2 +0.100000 0.062500 1/16 end mill
> > 3 3 +1.273000 0.201000 #7 tap drill
> > 99999 99999 +0.100000 0.000000 big tool number
> >
> > should be changed to:
> >
> > T1 P1 D0.125000 Z+0.511000 ;1/8 end mill
> > T2 P2 D0.062500 Z+0.100000 ;1/16 end mill
> > T3 P3 D0.201000 Z+1.273000 ;#7 tap drill
> > T99999 P99999 Z+0.100000 ;big tool number
> >
> > In general new tool table line format is:
> > T - integer tool number
> > P - integer pocket number
> > D - abs float tool diameter
> > X..W - float tool length offset on specified axis
> > I - float front angle (lathe tools)
> > J - float back angle (lathe tools)
> > Q - int tool orientation (lathe)
> > ; - begin of comment
> >
> > There is tool for converting to new tool tables in
> > src/emc/usr_intf/toolconvert.tcl
> > Usage: ./toolconvert filename
> > (original file is saved as filename.orig)
> >
> > tooledit.tcl support net table format if needed.
> >
> > Along with tooltable two gcodes was changed and TLO_ALONG_W inifile
> > option was removed.
> >
> > G43.1 In Km was changed to G43.1 Xn Ym ... Wn to allow set all tlo
> > values at runtime.
> >
> > G10 L1 P[tool number] R[radius] X[offset] Z[offset] Q[orientation] was
> > changed to
> > G10 L1 P[tool number] R[radius] X[offset] Y[offset] Z[offset] A[offset]
> > B[offset] C[offset] U[offset] V[offset] W[offset] I[frontangle] J
> > [backangle] Q[orientation]
> >
> > Additional info will be soon in emc devel docs at
> > http://www.linuxcnc.org/docview/devel
> >
> > regards,
> > Michael
> >
> > ------------------------------------------------------------------------------
> > The Planet: dedicated and managed hosting, cloud storage, colocation
> > Stay online with enterprise data centers and the best network in the
> > business
> > Choose flexible plans and management services without long-term contracts
> > Personal 24x7 support from experience hosting pros just a phone call away.
> > http://p.sf.net/sfu/theplanet-com
> > _______________________________________________
> > Emc-developers mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/emc-developers
> >
>
>
> ------------------------------------------------------------------------------
> The Planet: dedicated and managed hosting, cloud storage, colocation
> Stay online with enterprise data centers and the best network in the business
> Choose flexible plans and management services without long-term contracts
> Personal 24x7 support from experience hosting pros just a phone call away.
> http://p.sf.net/sfu/theplanet-com
> _______________________________________________
> Emc-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-developers
>
--
------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
