Is someone going to put in a good error message for when emc2 encounters an
invalid (i.e. outdated) tool table? Perhaps direct the user to a
documentation page on linuxcnc.org.
I'd try to create a script to convert the old format into the new format,
but I'm swamped right now. I'm sure that such a script would be appreciated
by people with a large table.
Mark
On Mon, Jan 25, 2010 at 5:39 PM, micges <[email protected]> wrote:
> Hello,
>
> Today I've merged tlo_all_axes into master development branch.
> On this branch tool length offset was extended to all nine axes.
> This brings major change to tool table format to hold those additional
> values.
> Old tool tables will not load any more.
> For example, old tool table:
>
> TOOLNO POCKET LENGTH DIAMETER COMMENT
>
> 1 1 +0.511000 0.125000 1/8 end mill
> 2 2 +0.100000 0.062500 1/16 end mill
> 3 3 +1.273000 0.201000 #7 tap drill
> 99999 99999 +0.100000 0.000000 big tool number
>
> should be changed to:
>
> T1 P1 D0.125000 Z+0.511000 ;1/8 end mill
> T2 P2 D0.062500 Z+0.100000 ;1/16 end mill
> T3 P3 D0.201000 Z+1.273000 ;#7 tap drill
> T99999 P99999 Z+0.100000 ;big tool number
>
> In general new tool table line format is:
> T - integer tool number
> P - integer pocket number
> D - abs float tool diameter
> X..W - float tool length offset on specified axis
> I - float front angle (lathe tools)
> J - float back angle (lathe tools)
> Q - int tool orientation (lathe)
> ; - begin of comment
>
> There is tool for converting to new tool tables in
> src/emc/usr_intf/toolconvert.tcl
> Usage: ./toolconvert filename
> (original file is saved as filename.orig)
>
> tooledit.tcl support net table format if needed.
>
> Along with tooltable two gcodes was changed and TLO_ALONG_W inifile
> option was removed.
>
> G43.1 In Km was changed to G43.1 Xn Ym ... Wn to allow set all tlo
> values at runtime.
>
> G10 L1 P[tool number] R[radius] X[offset] Z[offset] Q[orientation] was
> changed to
> G10 L1 P[tool number] R[radius] X[offset] Y[offset] Z[offset] A[offset]
> B[offset] C[offset] U[offset] V[offset] W[offset] I[frontangle] J
> [backangle] Q[orientation]
>
> Additional info will be soon in emc devel docs at
> http://www.linuxcnc.org/docview/devel
>
> regards,
> Michael
>
>
> ------------------------------------------------------------------------------
> The Planet: dedicated and managed hosting, cloud storage, colocation
> Stay online with enterprise data centers and the best network in the
> business
> Choose flexible plans and management services without long-term contracts
> Personal 24x7 support from experience hosting pros just a phone call away.
> http://p.sf.net/sfu/theplanet-com
> _______________________________________________
> Emc-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-developers
>
------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
