On 27.11.2012 18:12, andy pugh wrote > http://www.linuxcnc.org/index.php/forum/40-subroutines-and-ngcgui/11414-metric-lathe-subroutines-g71-g72-etc-etc?lang=english#11414 > > Might do what you want. > (I think that allows you to define a profile with G1 G2 and G3 moves, > then puts in the required cuts to make them, a typical G71) > > Somewhere I have seen another approach to adding G71 / G72 to > LinuxCNC, but I can't currently find it. > Dear Andy
Do you think that simply do something with 40 subroutine than one? And so I have to share the processing stages. My subroutine combines logical cylinder or cone of processing the final diameter (concave hemisphere, the hemisphere convex, taper) starting at the starting point on the axis Z. I wish I could do the same for the initial diameter of the end point on the Z axis The procedure is here, together with examples of applications. http://www.cnc.info.pl/topics54/ngcgui-toczenie-mocno-rozbudowana-procedura-vt40747.htm Regards Miki ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
