On Sunday 16 December 2012 15:17:03 Michael Haberler did opine: [huge snip]
Since it seems to be /usr/bin/milltask that is the likely suspect, some data on my installed version: gene@lathe:~/linuxcnc/configs/my-lathe$ ls -l /usr/bin/milltask -rwxr-xr-x 1 root root 385484 2012-12-15 18:32 /usr/bin/milltask gene@lathe:~/linuxcnc/configs/my-lathe$ sha1sum /usr/bin/milltask 6e6d2d301fab676fe438fca51a70570af61ca33a /usr/bin/milltask 2 Q's then, starting with its being supposedly replaced this morning, that is yesterdays date Or is that the build date? 2. Is it contaminated according to that sha1sum? For comparison same version, but from the mill's machine gene@shop:~/linuxcnc/configs/my-mill-atom$ ls -l /usr/bin/milltask -rwxr-xr-x 1 root root 385484 2012-12-15 18:32 /usr/bin/milltask gene@shop:~/linuxcnc/configs/my-mill-atom$ sha1sum /usr/bin/milltask 6e6d2d301fab676fe438fca51a70570af61ca33a /usr/bin/milltask Looks identical to me, but the mill runs fine. So that idea seems to have been worked over with a 1928A1, aka a tommy gun. I have by now, commented out whole sections of the .hal file, trying to isolate the defective section if there is one, to no avail. Next? Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! All husbands are alike, but they have different faces so you can tell them apart. I was taught to respect my elders, but its getting harder and harder to find any... ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
