Hello Andy,
I have been tinkering with your new config for the Fanuc style change, and have noticed the following, When doing a tool change TXXYY should call tool XX, offset YY, with the tool being the 1,2,3 etc, and the offset being the 10001, 10002, 1003, etc. entries in the tool table. Which I thought was how it was working until I made a tool call of T0102 after I called T0101, to stay with tool 1 and apply offset 10002 instead of offset 10001. When I made the MDI call of T0102 it asked me to insert tool 2 and click continue when ready, when it should have applied offset 10002. It looks like it is acting as a TYYXX operation when calling with the offset. When making just a tool with no offset call such as T01 it will ask to change to tool 1, or 2, or whatever TXX call is made. Is this something that can be changed in the toolchange.ngc file or is it something deeper than that? Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
