Hey Andy, Sorry for the delay, my email has been giving me trouble lately,
No we do not have separate tool offsets, wear offsets, and tool data, poor wording on my part, the only thing that we use is the standard Tool/Geometry/Fixed Offsets/Data/Numbers and the Wear/Assignable Offsets/Data/Numbers. We have never had the need to apply multiple offsets to one tool at any given time, I think that may have been a mis-understanding for a long time in the wording that I have been using in regards to this issue, and the tool offset patch for that matter. That's why when looking at what we came up, you can see I deleted the part about the G43.2, we don't even remotely want the operators to have the ability to apply multiple offsets at one time. As for what we came up with based on what you have done, it works perfectly, and is a whole bunch easier to configure on my end, and it clarifies what is going where and how things are working. When reading the description in the beginning of the Fanuc tool offset patch it sounds contradicting as to exactly what is happening and where the numbers go in to the tool table. Many Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
