Hi, We do not have this kind of "recovery" option in any of our machines. I also dont think there is much need for that. Because "if start from line no" is working like it should you can use that instead. Correct way to start from line is to run program throu until line we want to start from(Without actual movements like with "Machine Lock" switch on. And FeedsX100). After we get to line we want to start from we make sure current tool matches tool needed for this program block. If not we get an alarm "Tool no" if yes we go to pause state and after pressing play program starts to run. Of course there is a lot responsibility for machine operator if "start from line" is used but that is how it is with all CNC controls. Correct name for "start from line no" is Sequence Restart.
-- Tero Kaarlela Production Engineer Eka-Sorvaus OY Nivala Finland ----Alkuperäinen viesti---- Lähettäjä : [email protected] Pvm : 21/10/2016 - 14:35 (S) Vastaanottaja : [email protected] Aihe : Re: [Emc-developers] Start from line no On 21 October 2016 at 07:33, Niemand Sonst <[email protected]> wrote: > > I have not checked on the recent master, if that has been changed, does > the machine start with correct feed and speed and coolnat option? We did have a brief discussion about this on the IRC a few weeks ago, based on a forum request for a "recovery" file if the machine was shut down (deliberately or due to power cut) The machine could log the last line succesfully completed, along with machine-state at that point. On restart a dialog could offer to reinstate that state and continue, to manually set up that state and continue, or to ignore the file. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
