No idea but I have used 2.8 master for quite a long time but is probably a few months since last time I updated.
On Sun, 05 Mar 2017 13:47:06 -0600 Jon Elson <[email protected]> wrote: > Hello, all, > > I'm working on the fix to the hal_ppmc driver discussed last > weekend. So, first is to install a developer clone of the > master 2.8.0~pre1 version. I did this, and found that some > things that worked before are broken. > > First item is a loadrt command line option. > > The command line (in univpwm_load.hal) is this : > > loadrt hal_ppmc port_addr="0xecf8" timestamp="0x00" > > And, I get this error : > > Found file(REL): ./univpwm_load.hal > Note: Using POSIX realtime > timestamp=0x00: Invalid type character `*' > ./univpwm_load.hal:13: waitpid failed > /home/elson/linuxcnc-2.8/bin/rtapi_app hal_ppmc > ./univpwm_load.hal:13: > /home/elson/linuxcnc-2.8/bin/rtapi_app exited without > becoming ready > ./univpwm_load.hal:13: insmod for hal_ppmc failed, returned -1 > Shutting down and cleaning up LinuxCNC... > Note: Using POSIX realtime > LinuxCNC terminated with an error. You can find more > information in the log: > /home/elson/linuxcnc_debug.txt > and > /home/elson/linuxcnc_print.txt > as well as in the output of the shell command 'dmesg' and in > the terminal > > _______________________________ > > If I remove the timestamp="0x00" parameter from the command > line, the driver loads, and if I remove the hal code that > uses the pins exported by that option, then most of the > config seems to work. There is no asterisk character in the > command line, as the error line seems to suggest. The port > address parameter is working properly. > > Anybody have any idea what is causing this error? > > The other thing I observed is that the jog pendant does not > work, but keyboard jogging does work. I haven't done any > digging into why that might be. > > Thanks, > > Jon > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
