On Wednesday 29 January 2020 11:19:58 Gene Heskett wrote: > On Wednesday 29 January 2020 08:42:51 Juergen Gnoss wrote: > > cd into the dir you cloned initially > > then > > > > git pull > > > > ju
My web page has been updated with todays build of master. Installed and running well on my rpi4b. > Looks like it worked a treat: > >pi@rpi4:/media/pi/workspace/LinuxCNC-1-28-20 $ git pull > > remote: Enumerating objects: 16, done. > remote: Counting objects: 100% (16/16), done. > remote: Compressing objects: 100% (11/11), done. > remote: Total 16 (delta 9), reused 8 (delta 5), pack-reused 0 > Unpacking objects: 100% (16/16), done. > From https://github.com/LinuxCNC/linuxcnc > 582ad8f59..b2e2a6ad3 master -> origin/master > * [new branch] buster-on-buildbot -> > origin/buster-on-buildbot > > hmm, so the latest is buster-on-buildbot, but that might break. Can I > assume that master is what passed the buildbot stage without breakage? > What I am building also has the caveat that it breaks gscreen and > sourceview in gladevcp. But it sure runs nice with axis. > > Updating 582ad8f59..b2e2a6ad3 > Fast-forward > configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini | > 45 +++++++------------------------------------ > configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini | > 51 +++++++++++++----------------------------------- > docs/man/man9/kins.9 | > 8 ++++++-- > src/Makefile | > 5 +++++ > src/emc/kinematics/kinematics.h | > 15 +++++++++++++++ > src/emc/kinematics/kins_util.c | > 94 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >+++++++++++++++++++ src/emc/kinematics/trivkins.c > | 78 > ++++++++++++++++++++++++++++++++++++++++++---------------------------- >---- src/emc/kinematics/xyzac-trt-kins.c > | 50 +++++++++++++++++++++++++++++++++++++---------- > src/emc/kinematics/xyzbc-trt-kins.c | > 50 +++++++++++++++++++++++++++++++++++++---------- > 9 files changed, 264 insertions(+), 132 deletions(-) > create mode 100644 src/emc/kinematics/kins_util.c > > So I'll wash, rinse & repeat mv the src name to the new date and make > with debuild. > > Sounds easy enough. What I see above looks like it could be handy for > the conversion of my BS-1 to motorized indexing, although that doesn't > include tilt angles just yet, just motorized indexing for lights out > gear cutting. Since tilt angles are locking, that motorization gets a > lot more complex to program. > > Thank you > > > ________________________________ > > From: [email protected] > > <[email protected]> Sent: Wednesday, > > January 29, 2020 7:14 AM > > To: [email protected] > > <[email protected]> Subject: Emc-developers > > Digest, Vol 165, Issue 18 > > > > Send Emc-developers mailing list submissions to > > [email protected] > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > or, via email, send a message with subject or body 'help' to > > [email protected] > > > > You can reach the person managing the list at > > [email protected] > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Emc-developers digest..." > > > > > > Today's Topics: > > > > 1. (Gene Heskett) > > 2. Re: building on rpi4 (Gene Heskett) > > > > > > -------------------------------------------------------------------- > >-- > > > > Message: 1 > > Date: Tue, 28 Jan 2020 10:06:27 -0500 > > From: Gene Heskett <[email protected]> > > To: EMC DEV <[email protected]> > > Subject: [Emc-developers] building on rpi4 > > Message-ID: <[email protected]> > > Content-Type: text/plain; charset="utf-8" > > > > Greetings all: > > > > Working from a git clone I made on the 20th of January because what > > I built wouldn't install on my rpi4, dependency problems, I looked > > at the last few pages of a rebuild, seening enough that I should do > > a new clone of master so I did. But thats hard on your bandwidth. So > > what is the git command to update what I already have? > > > > I am building on a raspbian 10.2 armhf install, and I've 5k or so of > > warnings because its linked to library's no longer used. > > > > Thanks. > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > If we desire respect for the law, we must first make the law > > respectable. - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > > > ------------------------------ > > > > Message: 2 > > Date: Tue, 28 Jan 2020 13:37:42 -0500 > > From: Gene Heskett <[email protected]> > > To: [email protected] > > Subject: Re: [Emc-developers] building on rpi4 > > Message-ID: <[email protected]> > > Content-Type: Text/Plain; charset="iso-8859-1" > > > > On Tuesday 28 January 2020 10:06:27 Gene Heskett wrote: > > > Greetings all: > > > > > > Working from a git clone I made on the 20th of January because > > > what I built wouldn't install on my rpi4, dependency problems, I > > > looked at the last few pages of a rebuild, seening enough that I > > > should do a new clone of master so I did. But thats hard on your > > > bandwidth. > > > > > > So what is the git command to update what I already have? > > > > > > I am building on a raspbian 10.2 armhf install, and I've 5k or so > > > of warnings because its linked to library's no longer used. > > > > > > Thanks. > > > > > > Cheers, Gene Heskett > > > > New build doesn't look 100% either, but it installs and runs nice: > > > > dh_makeshlibs > > dh_installdeb > > cat debian/linuxcnc-uspace/DEBIAN/shlibs debian/shlibs.pre > > > debian/shlibs.local > > dh_shlibdeps -l debian/linuxcnc-uspace/usr/lib > > dpkg-shlibdeps: warning: debian/linuxcnc-uspace/usr/bin/milltask > > contains an unresolvable reference to symbol > > __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin > > dpkg-shlibdeps: warning: symbol _Z11CHANGE_TOOLi used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z17STRAIGHT_TRAVERSEiddddddddd used > > by debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of > > the libraries > > dpkg-shlibdeps: warning: symbol _Z21OPTIONAL_PROGRAM_STOPv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z13SELECT_POCKETii used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z14PALLET_SHUTTLEv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z20ENABLE_FEED_OVERRIDEv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z8FLOOD_ONv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z21STOP_SPEED_FEED_SYNCHv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z7COMMENTPKc used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z13TURN_PROBE_ONv used by > > debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: 26 other similar warnings have been skipped > > (use -v to see them all) > > dpkg-shlibdeps: warning: symbol __aeabi_atexit@CXXABI_ARM_1.3.3 used > > by debian/linuxcnc-uspace/usr/lib/liblinuxcncini.so.0 found in none > > of the libraries > > dpkg-shlibdeps: warning: debian/linuxcnc-uspace/usr/bin/rs274 > > contains an unresolvable reference to symbol > > __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin > > dpkg-shlibdeps: warning: can't extract name and version from library > > name 'libtk8.6.so' > > dpkg-shlibdeps: warning: debian/linuxcnc-uspace/usr/bin/schedrmt > > contains an unresolvable reference to symbol > > __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin > > dpkg-shlibdeps: warning: symbol _Z26GET_EXTERNAL_DIGITAL_INPUTii > > used by debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none > > of the libraries > > dpkg-shlibdeps: warning: symbol _Z23GET_EXTERNAL_POSITION_Bv used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z17SET_SPINDLE_SPEEDid used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z7COMMENTPKc used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z27GET_EXTERNAL_OFFSET_APPLIEDv > > used by debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none > > of the libraries > > dpkg-shlibdeps: warning: symbol _Z12START_CHANGEv used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z17GET_EXTERNAL_MISTv used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z22SET_NAIVECAM_TOLERANCEd used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: symbol _Z29GET_EXTERNAL_PROBE_POSITION_Xv > > used by debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none > > of the libraries > > dpkg-shlibdeps: warning: symbol _Z22GET_EXTERNAL_FEED_RATEv used by > > debian/linuxcnc-uspace/usr/lib/librs274.so.0 found in none of the > > libraries > > dpkg-shlibdeps: warning: 136 other similar warnings have been > > skipped (use -v to see them all) > > dpkg-shlibdeps: warning: symbol __aeabi_atexit@CXXABI_ARM_1.3.3 used > > by debian/linuxcnc-uspace/usr/lib/libpyplugin.so.0 found in none of > > the libraries > > dpkg-shlibdeps: warning: can't extract name and version from library > > name 'libtk8.6.so' > > dpkg-shlibdeps: warning: debian/linuxcnc-uspace/usr/bin/rtapi_app > > contains an unresolvable reference to symbol > > __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin > > dpkg-shlibdeps: warning: can't extract name and version from library > > name 'libtk8.6.so' > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libgio-2.0.so.0 (they use none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libz.so.1 (they use none of the library's > > symbols) dpkg-shlibdeps: warning: package could avoid a useless > > dependency if > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libXext.so.6 (they use none of the library's > > symbols) dpkg-shlibdeps: warning: package could avoid a useless > > dependency if debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/bin/halscope > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libfreetype.so.6 (they use none of the > > library's symbols) dpkg-shlibdeps: warning: package could avoid a > > useless dependency if debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libcairo.so.2 (they use none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/panelui was not linked against > > libutil.so.1 (it uses none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libXft.so.2 (they use none of the library's > > symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libpangoft2-1.0.so.0 (they use none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/bin/halscope > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libfontconfig.so.1 (they use none of the > > library's symbols) dpkg-shlibdeps: warning: package could avoid a > > useless dependency if debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libgdk_pixbuf-2.0.so.0 (they use none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libatk-1.0.so.0 (they use none of the library's symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so > > debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.arm-lin > >ux -gnueabihf.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so > > were not linked against libXss.so.1 (they use none of the library's > > symbols) > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > > debian/linuxcnc-uspace/usr/bin/halmeter > > debian/linuxcnc-uspace/usr/bin/classicladder > > debian/linuxcnc-uspace/usr/bin/halscope were not linked against > > libpangocairo-1.0.so.0 (they use none of the library's symbols) > > dh_gencontrol > > dpkg-gencontrol: warning: package linuxcnc-uspace: substitution > > variable ${python:Versions} unused, but is defined > > dpkg-gencontrol: warning: package linuxcnc-uspace: substitution > > variable ${python:Versions} unused, but is defined > > > > Whats up? > > > > Anyway, its rebuilt, installed and running sweet on my rpi4. Be > > sure to check the README on my site for the latest info. > > Thats at the link below, add "lathe-stf/" to the address bar, then > > click on linuxcnc4rpi4 to see it all. Read the README first. I've a > > new, stripped to rpi4 stuff kernel that needs taken for a walk, > > should run like the much bigger one but better. Your rpi4 WILL > > NEED heat sinks and a fan! > > Mine has the usual set of pi heat sinks plus an extra small one on > > the regulator chip next to the otg port, and a 12 volt fan from an > > old video card running on 5 volts and thats at least adequate for a > > -j4 build. > > > > Thanks. > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > If we desire respect for the law, we must first make the law > > respectable. - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > > > ------------------------------ > > > > > > > > ------------------------------ > > > > Subject: Digest Footer > > > > _______________________________________________ > > Emc-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > > > ------------------------------ > > > > End of Emc-developers Digest, Vol 165, Issue 18 > > *********************************************** > > > > _______________________________________________ > > Emc-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
