Hi Chris, On Samstag, 16. Mai 2020, 20:32:28 CEST Chris Morley wrote: > Try putting the T code well before the m6
This is the sequence I tried: === snip === ( T4 : 12.0 HPC ) G40 G80 T4 M6 N10 G0 G90 G54 X50 Y70 S4750 M3 T23 G43 H4 Z2 M8 G1 Z-9 F300 G1 X40.134 Y61.694 F800 G1 X38.719 Y55.036 G3 X57.269 Y38.038 I14.281 J-3.036 G1 X62.094 Y39.513 G3 X40.134 Y61.694 I-62.094 J-39.513 G1 X38.719 Y55.036 G1 X38.523 Y55.077 G3 X57.327 Y37.847 I14.477 J-3.077 G1 X62.403 Y39.399 G3 X39.999 Y62.02 I-62.403 J-39.399 G1 X38.523 Y55.077 G1 X50 Y70 G0 Z150 M5 M9 M6 === snap === So between T23 and the last M6 I expected to see the tool-prepare pin true. When I watched pins, it does not matter, whether they are short cutted. I see the signal too (same as halmeter) cheers Reinhard _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers