Oh, thanks Andy!
On Monday, August 16, 2021, 10:46:49 PM UTC, andy pugh <bodge...@gmail.com> wrote: On Mon, 16 Aug 2021 at 19:58, Alec Ari via Emc-developers <emc-developers@lists.sourceforge.net> wrote: > > RTAI 5.3.1 for LinuxCNC is running pretty good right now with kernel > 4.19.195. If you need lower latency, that is my suggestion. I don't know > anything about USC and it may not be compatible with the LinuxCNC RTAI hal > drivers, throwing this out there on a whim. It should be fine with USC. I have been fiddling with the repo the last few days and now the swap is fairly simple, instructions here: https://forum.linuxcnc.org/9-installing-linuxcnc/43213-can-not-install-linux-cnc?start=20#217918 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers