You could also look at the odroids from Hardkernel https://www.hardkernel.com/ Their Odroid H3 and H3+ is an X86 based PC. I think the cheaper H3 would be enough based on my experience with the earlier H2+ Also their N2+ (amlogic) and M1 (rockchip) would be worth a look. Debian is available for both boards via their forum I've been thinking about the N2+ to hopefully get away from the latency issues of the Realtek NIC chips on x86 They also have some other cool devices.
Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Tue, 8 Nov 2022 at 04:31, Bari <bari00...@gmail.com> wrote: > Hi Phil, > > > Thanks for looking into this. So many seem obsessed with the Rpi4 even > though they are practically unavailable at the moment. > > I started a thread on forums about possible boards we can use with links > to specs and their ups and downs. > > > https://forum.linuxcnc.org/18-computer/46077-potential-all-in-one-single-board-computers?start=0 > > > preempt_rt on just about any of them is not a problem including a rk3328 > board. There are even some ARM or RISC-V boards out now that have the > main processor for running Linux and a microcontroller to run Remora. > The rk3328 is a bit old right now. > https://www.libre.computer/products/roc-rk3328-cc/ > > > https://biqu.equipment/products/manta-m4p-m8p > > > https://linuxgizmos.com/mangopi-allwinner-based-sbc-available-for-27us/ > > > Lots of alternatives now. > > > On 11/7/22 10:08, Feral Engineer wrote: > > The subject pretty much says it. I've been hammering away at a few > > different raspberry pi alternative boards lately for 3d printer > > applications and was wondering if anyone has any experience (or if it's > > even possible) flashing the real time extensions to a sbc with a rockchip > > rk3328. For reference, the board I'd like to try is the libre renegade. > > > > Phil T. > > The Feral Engineer > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
