Ralph, some comments on your points.
First I would suggest a lot of information on this question can be found at "www.scc.ca". Secondly and very briefly as Art Michaels stated ULC stands for Underwriters Laboratories of Canada. ULC is a certification body accredited as is CSA and 14 others by the Standards Council of Canada. Again a great deal of information can be found at the SCC site. Hope this helps. Yours truly, G. Rae Dulmage Manager Standards Programs Standards Council of Canada Ralph Cameron wrote: > CSA accepts approval by ULC. The C is indicative of Canadian UL. UL is > normally not accpetable by itself in Canada > > Ralph Cameron > EMC Consulting and Suppresion of Consumer Electronics > (after sale) > > ----- Original Message ----- > From: "Horst Haug" <innova...@t-online.de> > To: "Peter Merguerian" <pmerguer...@itl.co.il>; <am...@westin.org>; > <emc-p...@majordomo.ieee.org> > Sent: Monday, September 10, 2001 5:24 AM > Subject: AW: UL vs CSA (IT product) > > > > > Amund, > > > > UL accept components approved by CSA and CSA accepts components approved > by > > UL. A CSA approved Power Supply within an end product with UL approval is > > no problem any more (that is my experience). > > The UL PAG "practical application guide" about is 1.5.002. I send it to > you > > in a separate EMAIL. > > > > With best regards > > Horst Haug > > > > -----Ursprüngliche Nachricht----- > > Von: owner-emc-p...@majordomo.ieee.org > > [mailto:owner-emc-p...@majordomo.ieee.org]Im Auftrag von Peter Merguerian > > Gesendet: Montag, 10. September 2001 09:44 > > An: 'am...@westin.org'; emc-p...@majordomo.ieee.org > > Betreff: RE: UL vs CSA (IT product) > > > > > > Amend, > > > > See my answers in body of your message. > > > > > > > > > > > > UL and/or CSA certification are mandatory within the electrical safety > area, > > to > > have access to the US and Canadian marked. Right ? > > > > I know there are some differences between them, the certification fee, the > > certification-handling period and the number of audit/year. > > > > My questions are: > > 1.Do they have the same status? > > > > Peter: Yes, to a certain extent. You must check the scope of their > > acceditations in OSHA's and Standard Council of Canada's websites. > > > > > > 2.What requirements do the end users/ buyers have, do most of them prefer > > one > > of the approvals? > > > > Peter: Depends on the categories. But most end-users are not aware that > > other NRTLs are capable of giving the same Listing service. > > You must educate them. > > > > 3.Do we have to go for both of them? > > > > Peter: One is enough, but as I said above, you must educate end-users to > > accept and also check if the test house is accredited for the particular > > standards. > > > > Best regards > > Amund Westin, Oslo/Norway > > > > > > > > -- > > Get your firstname@lastname email for FREE at http://Nameplanet.com/?su > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > majord...@ieee.org > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: pstc_ad...@garretson.org > > Dave Heald davehe...@mediaone.net > > > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > > Jim Bacher: j.bac...@ieee.org > > > > All emc-pstc postings are archived and searchable on the web at: > > No longer online until our new server is brought online and the old > > messages are imported into the new server. > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > majord...@ieee.org > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: pstc_ad...@garretson.org > > Dave Heald davehe...@mediaone.net > > > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > > Jim Bacher: j.bac...@ieee.org > > > > All emc-pstc postings are archived and searchable on the web at: > > No longer online until our new server is brought online and the old > > messages are imported into the new server. > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > majord...@ieee.org > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: pstc_ad...@garretson.org > > Dave Heald davehe...@mediaone.net > > > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > > Jim Bacher: j.bac...@ieee.org > > > > All emc-pstc postings are archived and searchable on the web at: > > No longer online until our new server is brought online and the old > messages are imported into the new server. > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: pstc_ad...@garretson.org > Dave Heald davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.