Hi George,

I don't think the margin makes any difference in applying the 80/80 rule.
If you have a series produced product you must apply the 80/80 rule using a
sample size of not less than 5 and not more than 12 pieces.  See Clause 11,
Assessment of conformity of equipment, of CISPR 11: 1999.

Happy New Year to all!

Best regards,

Jim

-----Original Message-----
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of George Stults
Sent: Monday, December 24, 2001 2:43 PM
To: 'emc-p...@majordomo.ieee.org'
Subject: -2dB margin


Hello Group,

I've been looking into the 80/80 rule for CISPR 22 compliance for mass
produced equipment.   I have found a description of the statistics in  CISPR
22 :1997  Section 7.1 and 7.2.  Its been my understanding that for testing
at OATS,  if the product has 2dB or less margin, then these statistical
methods are required.  Is that correct?  And, where does the reference to
'2dB margin' come from?

Thanks in  advance

George S.


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to