Hello group, IEC 61000-4-6 mentions a decision chart on the use of injection method: 1rst question of this chart: are suitable CDN's available? if YES: use CDN as per 6.2.2 if NO: use other means (e.g. EM Clamp)
My question: 1. Are CDN's used for CE in EN55022 "suitable" CDN's for ethernet 10/100BaseT? (like ENY22 of R&S) I might assume these CDN will at least attenuate the ethernet signal and thus make the signal more sensitive to the AM coupled signal 2. Assumed the CDN is suitable, is it allowed to use an alternative method like EM Clamp anyway? As usual, many thanks for your valuable responses Regards, Kris Carpentier ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
