A couple of questions about our standard North American 120Vac socket: 1. Orientation: We have lots of people in the office here on both sides of this one, and I can't find a normative reference in the CEC or the NEC. Which is the correct way "up" when installing a socket on a wall - ground pin above the L and N blades, or L and N above the ground? What is the code reference for this requirement, or is there none?
2. Dimensions: Can anybody share the spec's for the dimensions, with tolerances, of the line, neutral, and ground blades for this configuration? I'm sure it's in the UL and CSA standards but I don't want to spend hundreds of $ for a one-time question. We have no on-going need for these standards! Thanks in advance for your help, Regards, Jim Eichner, P.Eng. Manager, Engineering Services Xantrex Technology Inc. Mobile Power web: www.xantrex.com <http://www.xantrex.com> Any opinions expressed are accidental. I have none. Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"