Hi All,
We have indeed applied for an been accepted in most jurisdictions.
Regards,
Frank West
---[From the computer of...]-----------------------------------------
TUV Rheinland of North America
Mr. Frank West
Sr. Engineer
7853 SW Cirrus Dr.
Beaverton, OR. 97008
T 503-469-8880 Ext 205
F 503-469-8881
www.us.tuv.com
Rich Nute
<ri...@sdd.hp.com> To: geor...@lexmark.com
Sent by: cc:
richwo...@tycoint.com, emc-p...@majordomo.ieee.org
owner-emc-pstc@majordom Subject: Re: TUV NRTL
o.ieee.org
02/07/2002 12:46 PM
Please respond to Rich
Nute
Hi George:
> However, for the U.S. OSHA establishes acceptable NRTLs, and the
> CFR uses the words "NRTL", so I do not see how an electrical
> inspector could object to what the Federal Government has sanctioned.
The inspector must abide by the certifications
approved by the local building/electrical code
jurisdiction.
It would be more accurate to substitute "local
jurisdiction" for "inspector."
OSHA NRTL and local code processes are independent
of each other. I agree that it would be prudent
of the local jurisdiction to accept OSHA NRTLs
rather than establish other criteria which might
exclude one or more NRTLs.
I believe TUV-R has indeed applied for acceptance
in most or all local jurisictions. (Don't rely
on my belief.)
Best regards,
Rich
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
