Sandy: The attached link gives guidelines on how to inform users of the DOC. It even offers translations, in the 11 official languages of the EU, of a short form declaration that is to be given in the user manual.
The complete DOC is to be made available, in print, on CD ROM, or on the web. http://europa.eu.int/comm/enterprise/rtte/tcam5.htm#tcam5_3 Chuck Burns Manager of Compliance Cubic Transportation Systems, Inc. 5650 Kearny Mesa Road San Diego, CA 92111 Tel.: (858) 627-4562 Fax: (858) 292-9987 chuck.bu...@cubic.com -----Original Message----- From: Mazzola, Santo [ mailto:santo.mazz...@baesystems.com] Sent: Wednesday, April 30, 2003 2:55 PM To: 'richwo...@tycoint.com'; emc-p...@majordomo.ieee.org Subject: RE: D of C again Rich, Just a question. If you are not going to put the D of C in the users manual to satisfy the RTTE directive requirement of having a D of C with the product, is there another more elegant place to put it. Any other suggestions would be interesting to note. How about the idea of putting an online link to where the DOC could be found. Do you think that would meet the RTTE requirement of D of c with product. Thanks Sandy Mazzola BAE Systems -----Original Message----- From: richwo...@tycoint.com [ mailto:richwo...@tycoint.com] Sent: Wednesday, April 30, 2003 1:48 PM To: emc-p...@majordomo.ieee.org Subject: RE: D of C again Doug, I respectfully disagree with your general statement that "A copy of the D of C that states the directives complied with must be placed in the user manual." There may be a particular directive that may have this requirement, but I don't beleive that it is the LV, EMC nor the RTTE Directives. The RTTE Directive does require that a copy of the DoC be included with the product, but there is no requirement that it be included in the user manual. Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: douglas_beckw...@mitel.com [ mailto:douglas_beckw...@mitel.com] Sent: Tuesday, April 29, 2003 11:19 AM To: lfresea...@aol.com Cc: emc-p...@majordomo.ieee.org Subject: Re: D of C again And the answer is........................ The D of C must be signed by the responsible person designated by the manufacturer. The signatory does not have to be located in the EU. The manufacturer must designate a representative in the EU who will hold the certificate and the technical file. This could be an agent, distributor. A copy of the D of C that states the directives complied with must be placed in the user manual. Note, this does not have to be signed, but it must state where the signed original can be obtained. i.e. the EU representative's contact details. Doug Beckwith (OOPO) lfresea...@aol.com Sent by: To: emc-p...@majordomo.ieee.org owner-emc-pstc@majordom cc: o.ieee.org Subject: D of C again 04/29/03 09:13 AM Please respond to Lfresearch Hi folks, I've been asked by a US manufacturer who's signature if any should appear on the D of C, and should they be located on European soil. Is there a clear consensus? Thanks, Derek N. Walton Owner L F Research EMC Design and Test Facility Poplar Grove, Illinois, USA www.lfresearch.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc