Alex, I think your matrix is a great idea but for Australia and NZ (Australia in particular) it is not that simple to cover all the compliance issues for your product categories in a matrix this simple.
Joe Randolph was correct about PSTN standards for Australia and NZ (AS/ACIF S002 and PTC 200). Concerning safety, ACA TS001:1997 is the present requirement. This should change very soon however to allow compliance with either AS/NZS 60950:2000 or TS001. AS/NZS 60950:2000 = IEC 60950 + Australian national deviations. There is likely to be a brief transitional period where compliance with either standard is acceptable then TS001 will be withdrawn and compliance with AS/NZS 60950:2000 will be required. For Australia and NZ there is a large amount of information required to be added concerning your major categories: - "If Modem - ISDN" - "If Wireless - Short Range - Bluetooth" - "If Wireless - Short Range - 433 MHz" - "If Wireless - Long Range - GSM" - "If Wireless - Long Range - CDMA" Unfortunately I can not spare the time here to populate your matrix for you for Australia and NZ. Sorry. If you really want to work on adding more information for Australia and NZ please contact me direct. Best regards, Kevin Richardson Stanimore Pty Limited Compliance Solutions for Technology Products (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@ieee.org This material (this message and the information contained in all attachments to this message) is confidential and/or privileged information and is intended only for the addressee/s named above. Any unauthorised dissemination, copying, use of or reliance upon this material by persons or entities other than the addressee/s named above is prohibited. If you receive this material in error, please notify Stanimore Pty Limited and destroy all copies (electronic and hardcopy) of this message and all attachments immediately. From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Alex McNeil Sent: Friday, 5 September 2003 5:23 PM To: Emc-Pstc (E-mail) Subject: Approvals Matrix Hi Group, I have started an Approvals matrix for Europe, North America and Australasia for typical low power ITE office products. I would be extremely grateful if those experts amongst you could comment on the validity and indeed add to it. Thanks in anticipation of your usual response. Kind Regards Alex McNeil Principal Engineer This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc