Kevin: There is a presentation regarding ESD on the RAFT website, it may be of some help as it does talk about calibration. It is titled "ESD Today" www.raft-global.org
Regards: Kevin Keegan Senior Associate KES & Associates 1 Stonecroft Terrace Kanata, Ontario Canada K2K 2V1 Tel: 613-592-0820 Email: kkee...@kesandassociates.com Web: http://www.kesandassociates.com Regulatory Approval Forum Chairperson www.raft-global.org IMPORTANT NOTICE: This email is intended only for the individual or entity to which it is specifically addressed and should not be read by, or delivered to, any other person. Such material may contain privileged or confidential information, the disclosure or other use of which by other than the intended recipient may result in the breach of certain laws or the infringement of rights of third parties. If you have received this email in error, please delete it immediately and notify the sender. I thank you in advance for your co- operation and assistance. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc