I suggest there is an important distinction between "video averaging"
and "average detection using limited VBW".

If this is correct, can someone enlighten those of us who are unsure?

Ralph McDiarmid, ASc
Compliance Engineering Group
Xantrex Technology Inc.



From: owner-emc-p...@ieee.org [mailto:owner-emc-p...@ieee.org] On Behalf
Of Cortland Richmond
Sent: December 16, 2004 1:04 PM
To: Alex McNeil; ieee pstc list
Subject: Re: Conducted Emissions PK/AVG


Alex McNeil asked:
>> Is the problem that the Test House may have used "AVG BW 30KHz" and
>> this
should have been "AVG BW 9KHz" the problem <<

Sure looks like it from what you posted. There've been discussions here
-- it comes up every so often -- how to to do averaging on a SA.
Without knowing how they did, it's hard to say for sure, but it looks
like you are close enough to hit the target with a hand grenade anyway.
But are you sure it doesn't say 30 *Hz*? Narrowing the bandwidth 'way
down is a method used to get averaging on a SA. (I will speculate that
someone might have "learned" to -- incorrectly -- use video averaging in
dB mode then increase BW to compensate for the error that causes.)

Cortland Richmond


This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas             emcp...@ptcnh.net

For policy questions, send mail to:

     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas             emcp...@ptcnh.net

For policy questions, send mail to:

     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to