Folks, I will share with you what I was told about shipping AC adapters to Japan however, it is better to get the latest info directly from MITI. It is the IMPORTERs legal obligation to keep the certificate and testing record as required by the DENAN Law for 3 years * "It is necessary to have product safety compliance conformity from the manufacturer or Third-Party Conformity Assessment Body" (IN JAPAN)
"Actually you are partially correct as wall/floor type power supplies and power cords do require approval by a MITI accredited lab and must bear the PSE Diamond Mark". (TRUE) * It is compulsory to have conformity assessment from a Third-Party Conformity Assessment Body that is authorized and approved by MITI. (TRUE) Ministry of International Trade and Industry (MITI) and not METI, Power chord do not require certification as long as you put the correct statement in your user manual. " This chord should be used with our equipment only". (Translate it into Japaneese). If anyone is shipping a 12vdc/1.5A adapter with their products to Japan let me know the PS vendor or their website. Christopher Mark Schmidt <[email protected]> wrote: Hi John, Your right - I wasn’t even thinking PSE Circle mark but the PSE circle mark appears to be required according to this link, it states it is similar to CE Marking requirements. http://www.engineeringtalk.com/news/tvi/tvi114.html Regards, Mark _____ From: Tyra, John [mailto:[email protected]] Sent: Monday, May 09, 2005 2:15 PM To: Mark Schmidt; emc-pstc Subject: RE: PSE Mark for Japan Hello Mark, Thanks for taking the time to respond. Actually you are partially correct as wall/floor type power supplies and power cords do require approval by a METI accredited lab and must bear the PSE Diamond Mark. Under their regulatory scheme Japan has three categories of products. Here are the descriptions from the TUV Rheinland International website for the two which require validation: http://www.int-app.tuv.com/News/2001/010313.asp 1. Special Electrical Appliance and Material products * It is compulsory to have conformity assessment from a Third-Party Conformity Assessment Body that is authorized and approved by METI. * Only a Third-Party Conformity Assessment Body is entitled to issue the "Certificate of Conformity." * It is the manufacturer's legal obligation to keep the certificate and testing record as required by the DENAN Law. The PSE diamond mark is legally required on the label for identification purposes. 2. Other than Special Electrical Appliance and Material products * It is necessary to have product safety compliance conformity from the manufacturer or Third-Party Conformity Assessment Body * It is the manufacturer's legal obligation to keep the certificate and testing record as required by the DENAN Law. * The PSE circle mark is legally required on the label for identification purposes. The Bose products would fall under the second category "Other than Special Electrical Appliance and Material products" which is a self declaration, similar to the EU CE Mark, requiring marking with the PSE Circle mark. The only question in this case is whether Bose has too mark the product because their input voltage is under 100Vac. We will have these products tested for Safety and EMC compliance but we have been told that the products should not bear the PSE Circle Mark as they are under the 100Vac limit.... Is this true?...that is the question I hope to get advice on regards, John Tyra Manager Product Safety Bose Corporation The Mountain, MS-450 Framingham, MA 01701-9168 Phone: 508-766-1502 Fax: 508-766-1145 -----Original Message----- From: Mark Schmidt [mailto:[email protected]] Sent: Monday, May 09, 2005 1:34 PM To: Tyra, John; emc-pstc Subject: RE: PSE Mark for Japan Hello John, My understanding is that as of today, the only requirement for the Denan (PSE) mark as it applies to your equipment would be the power supply and power cords. Since you are not providing a power supply you have no need to apply the mark. As for EMC, Japan normally only requires radiated and conducted emissions based on CISPR16 but they may also request additional information based on the IEC immunity requirements. Best Regards, Mark Schmidt Regulatory Compliance X-Rite Incorporated USA 616 257 2469 <mailto:[email protected]> [email protected] <http://www.xrite.com/> www.xrite.com _____ From: [email protected] [mailto:[email protected]] On Behalf Of Tyra, John Sent: Monday, May 09, 2005 10:15 AM To: emc-pstc Subject: PSE Mark for Japan Hello everyone, We have a couple of low voltage(<30Vdc) DC IEC60065 type professional products which will not be shipped to Japan with a power supply. It is up to the installer to provide the power. We have been told by our Japan office that these low voltage products should not have the PSE circle Mark on the label as they are under 100Vac. My questions are as follows: 1. Since these products are <100V are they exempt from the PSE circle Mark requirements? 2. If they are exempt from Safety requirements are they still required to meet EMC requirements for Japan? Are they required to bear the PSE Circle Mark to show EMC compliance similar to the CE requirements in Europe? Thanks in advance for your help. Regards, John Tyra Manager Product Safety Bose Corporation The Mountain, MS-450 Framingham, MA 01701-9168 Phone: 508-766-1502 Fax: 508-766-1145 ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Sociiety emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Sociiety emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ----------------- ---------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
