On Mon, 9 May 2005 14:14:36 -0400, "Tyra, John" <[email protected]> wrote:
> The Bose products would fall under the second category "Other than > Special Electrical Appliance and Material products" which is a self > declaration, similar to the EU CE Mark, requiring marking with the PSE > Circle mark. The only question in this case is whether Bose has too > mark the product because their input voltage is under 100Vac. We will > have these products tested for Safety and EMC compliance but we have > been told that the products should not bear the PSE Circle Mark as they > are under the 100Vac limit.... DENAN is applicable only to the products which are explicitly listed, and products which are not rated for 100V to 300V would be excluded from the scope of the Law for most categories of the products (different voltage range applied for some categories). If the product is outside of the scope of DENAN, is shall not bear the PS-E mark. Regards, Tom Tomonori Sato <[email protected]> URL: http://homepage3.nifty.com/tsato/ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
