Based upon experience, recommend 16 point type, with the
absolute minimum 12 point, ok 10 point.
- Robert -
On Fri, 29 Jul 2005 07:43:54 +0100
"James, Chris" <c...@dolby.co.uk> wrote:
> John - thanks but I asked if there was a spec - I already
> know what en
> 60065 says
>
> "Markings shall be permanent, comprehensible and easily
> discernable on
> the apparatus when ready for use."
>
> I don't call that a spec it is far too vaugue it does not
> even say
> easily discernable with the unaided eye!!
>
> I'm looking for a font size even if it is just a
> recommendation...........
>
> C
>
>
> -----Original Message-----
> From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On
> Behalf Of John
> Woodgate
> Sent: Thursday, July 28, 2005 9:42 PM
> To: emc-p...@ieee.org
> Subject: Re: legend size
>
> "James, Chris" <c...@dolby.co.uk> wrote (in
>
<b67b4a25cf806d48bf72a6675ab9043101381...@kestrel.dolby.net>)
> about
> 'legend size', on Thu, 28 Jul 2005:
> >Anyone know a spec for the minimum font/legend size for
> Caution/Warning
>
> >and Rating markings on product with respect to EN60065
> please?
>
> See the first sentence of clause 5 of EN 60065:2002.
> --
> Regards, John Woodgate, OOO - Own Opinions Only.
> Deadlines are 90% of deadliness.
> http://www.jmwa.demon.co.uk Also see
> http://www.isce.org.uk
>
>
> This message is from the IEEE Product Safety Engineering
> Society
> emc-pstc discussion list. Website:
> http://www.ieee-pses.org/
>
> To post a message to the list, send your e-mail to
> emc-p...@ieee.org
>
> Instructions:
>
http://listserv.ieee.org/listserv/request/user-guide.html
>
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
>
> Scott Douglas emcp...@ptcnh.net
> Mike Cantwell mcantw...@ieee.org
>
> For policy questions, send mail to:
>
> Richard Nute: ri...@ieee.org
> Jim Bacher: j.bac...@ieee.org
>
> All emc-pstc postings are archived and searchable on the
> web at:
>
> http://www.ieeecommunities.org/emc-pstc
>
>
>
> -----------------------------------------
> This message (including any attachments) may contain
> confidential
> information intended for a specific individual and
> purpose. If you are
> not the intended recipient, delete this message. If you
> are not the
> intended recipient, disclosing, copying, distributing, or
> taking any
> action based on this message is strictly prohibited.
>
>
> This message is from the IEEE Product Safety Engineering
> Society
> emc-pstc discussion list. Website:
> http://www.ieee-pses.org/
>
> To post a message to the list, send your e-mail to
> emc-p...@ieee.org
>
> Instructions:
>
http://listserv.ieee.org/listserv/request/user-guide.html
>
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
>
> Scott Douglas emcp...@ptcnh.net
> Mike Cantwell mcantw...@ieee.org
>
> For policy questions, send mail to:
>
> Richard Nute: ri...@ieee.org
> Jim Bacher: j.bac...@ieee.org
>
> All emc-pstc postings are archived and searchable on the
> web at:
>
> http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
