Does any one know if "A. Kohlig" is a member of this list and can shed some light on what is going to be happening with the coming documents? Any educated guesses as to if/when any of those will become harmonized and replace EN61326:97 + ammendments? Facts are always preferred over speculation. Thanks, Doug
From: [email protected] [mailto:[email protected]]On Behalf Of John Woodgate Sent: Wednesday, July 27, 2005 6:02 AM To: [email protected] Cc: [email protected] Subject: Re: IEC 61326-2-3 [email protected] wrote (in <of70b733e9.820f7a87-on8625704b.003a76a4-8625704b.003ab...@mmm.com>) about 'IEC 61326-2-3', on Wed, 27 Jul 2005: >Does this mean that there is a 61326-2-1 and 61326-2-2 floating around >somewhere? Is there a method to the numbering? Yes, the first 2 is the Part number and the following number is the Section. However, IEC changed the numbering system a while back, abolishing 'Sections', but not all committees seem to be aware. The standard may in fact be published as IEC 61326-23. If you go to the public part of the IEC web site and look at the Work Program of SC65A you find the following box of delights: IEC 61326-1 Ed. 1.0 RDIS 65A/418/CDV 05-06 05-09 06-02 WGs : WG 4 (MT 61326) Project Leader : A. KOHLIG Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 1: General requirements IEC 61326-2-1 Ed. 1.0 RDIS 65A/426/CDV 05-06 05-09 06-02 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-2 Ed. 1.0 RDIS 65A/427/CDV 05-06 05-09 06-02 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-3 Ed. 1.0 ADIS 65A/433/CDV 05-07 05-11 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-4 Ed. 1.0 ADIS 65A/434/CDV 05-07 05-11 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 61326-2-5 Ed. 1.0 CCDV 65A/439/CDV 05-05 06-01 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to communication profile Family 3 Profile 3/2 IEC 61326-2-6 Ed. 1.0 RDIS 65A/428/CDV 05-06 05-09 06-02 WGs : 4 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In-vitro diagnostic (IVD) medical equipment IEC 61326-3-1 Ed. 1.0 CCDV 65A/437/CDV 05-04 05-12 Project Leader : A. Kohlig Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for equipment performing or intended to perform safety related functions (functional safety) - General industrial applications -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
