David, I am quite certain that a 'telecommunications center' is a central office. But, before just assuming that Class A is ok for telecom centers, I'd check with the telecom company to be sure that they don't have a requirement for Class B (I have this gut feel that I've run into that but I can't remember any specifics). Best Regards -Dave
On 6/9/06, David Gelfand <david.gelf...@mitectelecom.com> wrote: I need help from our esteemed CE mark experts! EMC radio equipment standard EN 301 489-1 calls out EN 55022 Class B limits in general, and Class A limits for "...equipment intended for use in telecommunication centres only,..." What is considered a "telecommunication centre?" Unfortunately I can not find any definition for this term in the standard, or in any other standards I have consulted. Is a point-of-sale terminal system with a rooftop antenna considered a "telecommunication centre?" My understanding is that EN 55022 Class B limits apply to residential environments, and Class A applies to commercial and industrial environments. I would hope in our situation that Class A will suffice. If not I am up the proverbial creek without a paddle... Thanks in advance, David. David Gelfand, P.E. Product Integrity Engineer Mitec Telecom Inc 9000 Trans-Canada Highway Montreal QC H9R 5Z8 Canada 514 694 9000 x2262 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <mailto:emcp...@ptcnh.net> emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: <mailto:j.bac...@ieee.org> j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: <http://www.ieeecommunities.org/emc-pstc> http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc