In message <[email protected]>, dated Tue, 3 Jul 2007, 
Cortland Richmond <[email protected]> writes:

>Sometimes you just have to measure enough production items to get an 
>idea of how much they differ from each other.  It may not be necessary 
>to do a full-up test; I have seen such testing done with a current 
>clamp.

Item 8 of Annex II of the new EMC Directive says:

8. The manufacturer must take all measures necessary to ensure that the 
products are manufactured in accordance with the technical documentation 
referred to in point 3 and with the provisions of this Directive that 
apply to them.

I think that means, among other things, that the test results for 
high-volume production items must be recorded and subjected to the usual 
quality assurance statistical procedures to control variations before 
they turn into violations.

This is not new: the same applies under the old Directive (which has 
only 17 days left!), but it is less obviously stated.
-- 
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
There are benefits from being irrational - just ask the square root of 2.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to