Good point Wendy, I always control my Equipment from Compliance 5, so I have
never used the SW that comes with it.
Cheers,
Derek.;
-----Original Message-----
From: WNya <wendy...@yahoo.com>
To: Pawson, James <james.paw...@echostar.com>
Cc: EMC-PSTC <EMC-PSTC@LISTSERV.IEEE.ORG>
Sent: Wed, Aug 31, 2011 6:56 pm
Subject: Re: EMI Receiver - Recommendations?
James,
Do ask for a demo unit and ensure that the emissions SW that you are using is
able to control it.
By the way I'm using the PMM receiver up to 3GHz with TDK RFS SW. You would
probably want to consider the 6GHz option. PMM is not a spectrum, hence if you
like the features of colorful trace, more than one traces, max hold traces,
etc, it doesn't work. TESEQ sells and supports PMM in US. You can probably
get a demo unit from them. It comes with a free SW but it does minimal - no
control of antenna mast or turntable.
Sent from Wendy.Nya iPhone
On Aug 30, 2011, at 6:31 PM, "Pawson, James" <james.paw...@echostar.com> wrote:
I should add that the main standard we test to is EN 55022.
Thanks
James
________________________________
From: Pawson, James [mailto:james.paw...@echostar.com
<mailto:james.paw...@echostar.com?> ]
Sent: 30 August 2011 11:12
To: <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] EMI Receiver - Recommendations?
Hello,
We are budgeting for a replacement for our ageing R&S ESVS10 EMI
receiver.
Apart from R&S I've found Agilent and Teseq that make EMI receivers.
Does anyone have any thoughts on which EMI receiver manufacturer they
prefer
and why? I'm thinking about things like support, software to drive the
receiver, cost of repair and calibration, reliability etc. Also, are there
other manufacturers that I've not found yet?
We seem to have had good reliability from our R&S receiver (12+ years of
service) but repairs have always seemed expensive and taken a long time.
Support is generally good compared to other test equipment manufacturers.
Thanks in advance
James
~~~~~~~~~~~~~~~~~~~~~~
James Pawson
Leading Hardware Engineer - EMC
EchoStar Europe
~~~~~~~~~~~~~~~~~~~~~~
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc
discussion list. To post a message to the list, send your e-mail to <
<mailto:emc-p...@ieee.org> emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at
<http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to
that URL.
Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/
Instructions: <http://listserv.ieee.org/request/user-guide.html>
http://listserv.ieee.org/request/user-guide.html
List rules: <http://www.ieee-pses.org/listrules.html>
http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas < <mailto:emcp...@radiusnorth.net>
emcp...@radiusnorth.net>
Mike Cantwell < <mailto:mcantw...@ieee.org> mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher < <mailto:j.bac...@ieee.org> j.bac...@ieee.org>
David Heald < <mailto:dhe...@gmail.com> dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc
discussion list. To post a message to the list, send your e-mail to <
<mailto:emc-p...@ieee.org> emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at
<http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to
that URL.
Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/
Instructions: <http://listserv.ieee.org/request/user-guide.html>
http://listserv.ieee.org/request/user-guide.html
List rules: <http://www.ieee-pses.org/listrules.html>
http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas < <mailto:emcp...@radiusnorth.net>
emcp...@radiusnorth.net>
Mike Cantwell < <mailto:mcantw...@ieee.org> mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher < <mailto:j.bac...@ieee.org> j.bac...@ieee.org>
David Heald < <mailto:dhe...@gmail.com> dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
