Scott If you're not aware of it, you may find this guidance helpful: http://ec.europa.eu/energy/efficiency/e odesign/doc/legislation/guidelines_for_smes_1275_2008_okt_09.pdf Regards Chris
________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Scott Douglas Sent: 30 August 2011 04:59 To: emc-p...@ieee.org Subject: EuP Off-Mode and Standby Mode Question on REGULATION (EC) No 1275/2008 stand-by and off-mode consumption of products. >From Annex II, 1.(c) Equipment shall, except where this is inappropriate for the intended use, provide off mode and/or standby mode, and/or another condition which does not exceed the applicable power consumption requirements for off mode and/or standby mode when the equipment is connected to the mains power source. If my product has a Standby mode which exceeds 1.0W and it has an Off-mode that is less than 0.5W (typically 0.0W), does that mean it is compliant to today's requirements? The argument from one side is that it has both Standby and Off modes so both modes must be compliant. The other side argues that it has a compliant Off mode, so Standby mode does not matter. Who is right? Second question, has anyone argued the "except where this is inappropriate for the intended use" statement yet? If you have, I'd like to hear about it off-line if you would be willing to share. Thanks to everyone for your comments. Scott Douglas - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>