Hi Kim, My opinion is that you shall apply the EMC D for the alarm part and the R&TTE D for the SRD part.
Alarm functions: EN50130 SRD functions: R&TTE D EMC part: EN301 389-3 R&TTE D radio parts: EN 300 220-2/-3 or EN 300 330-2 or EN 300 440-2 Rationale: The main function for the device is the alarm function while the SRD part obvious is extra features. But keep the exclusion band for the SRD functions in mind when you are testing the alarm functions. Best regards Helge Knudsen DK From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Kim Boll Jensen Sent: 18. marts 2011 08:57 To: emc-p...@ieee.org Subject: EMC D and R&TTE D Hi We have been testing on a home alarm system from China. We would like to use EN 50130 (alarms) which uses 10 v/m RF immunity test. The product is also a SRD and is therefore under R&TTE where EN 50130 is not harmonized. For SRD EN 301 489 uses only 3 v/m. Can it be true that you can degrade the immunity requirements of a product just by adding a SRD function? I know that R&TTE D accept the use of standards from the EMC D, but can we state that the alarm standard shall be used or can they choose between the standards? Best regards, Mr. Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
