Hi Ted, Thanks for info. Did you mean the Europlug needs to have all countries approval or to have any one approval only before legally used in all European countries.
Scott On 25/1/12 2:33 AM, "Ted Eckert" <ted.eck...@microsoft.com> wrote: > Hello Scott, > > The Europlug is commonly accepted across Europe with the exception of the > countries that use the BS 1363 plug. You will find that a Europlug complying > with EN 50075 and IEC 60884-1 can get approvals from all of the major European > approvers. Here is one example > <http://www.volexpowerproducts.com/index.php?option=com_ecatalog&task=plugdeta > ils&classid=1&countryid=1&plugid=178&Itemid=31> that has CEBEC, Demko, Fimko, > IMQ, KEMA KEUR, Nemko, ÖVE, Semko, ESTI and VDE. (I am referencing this one > vendor only because I know they clearly list the approvals on their web site. > There are plenty of other cord vendors with similar products.) > > The restrictions to the use of the Europlug are that the equipment must be > Class II and rated no more than 2.5 A. If you meet these requirements, you > will find that there are generally no regulatory barriers to including this > plug with your product. > > Ted Eckert > Compliance Engineer > Microsoft Corporation > 1 Microsoft Way > Redmond, WA 98052 > (425) 707-9205 > ted.eck...@microsoft.com <mailto:ted.eck...@microsoft.com> > > This email message may contain confidential and proprietary information. Any > unauthorized use is prohibited. If you are not the intended recipient, please > contact the sender by reply email and destroy all copies of the original > message. > > -----Original Message----- > From: Scott Xe [mailto:scott...@gmail.com] > Sent: Tuesday, January 24, 2012 9:12 AM > To: Ted Eckert; EMC-PSTC@LISTSERV.IEEE.ORG > Subject: Re: power plugs > > In Europe, Euro plug is widely used and accepted although each country may > have their own plug. As in EN standard, the product must be fitted with the > plug in the country where the product is sold. Is Euro plug legally correct > in those countries? I have learnt that it is allowed as the population of > some European countries is relatively small. Otherwise, the product may be > higher in price and they get less choice from the suppliers. Anyone knows > about this practice? > > Thanks and regards, > > Scott > > On 24/1/12 10:18 AM, "Ted Eckert" <ted.eck...@microsoft.com > <mailto:ted.eck...@microsoft.com> > wrote: > >> > Hi Brian, >> > >> > You will want the CEE 7/7 for most of Europe. It works in almost any >> > European outlet that doesn't accept one of the three that you >> > mentioned. The BS 1363 covers the UK, Ireland and Malta. The SEV 1011 >> > only covers Switzerland. Make sure your supplier conforms to the new >> > SEV 1011:2009 since Switzerland will require partially insulated pins >> > next year. The CEI 23-16 will work only in Italy. >> > >> > Ted Eckert >> > Compliance Engineer >> > Microsoft Corporation >> > ted.eck...@microsoft.com <mailto:ted.eck...@microsoft.com> >> > >> > The opinions expressed are my own and do not necessarily reflect those >> > of my employer. >> > >> > -----Original Message----- >> > From: Brian Oconnell [mailto:oconne...@tamuracorp.com] >> <mailto:[mailto:oconne...@tamuracorp.com]> >> > Sent: Monday, January 23, 2012 3:43 PM >> > To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> >> > Subject: power plugs >> > >> > Want to reduce number of plug types on pwr cords. Where I need ground >> > pin, was thinking of reducing types to CEI23-16, SEV1011, and BS1363A. >> > >> > Is this a stupid idea? Am I missing a major European plug type? >> > >> > thanks, >> > Brian >> > >> > - >> > ---------------------------------------------------------------- >> > This message is from the IEEE Product Safety Engineering Society >> > emc-pstc discussion list. To post a message to the list, send your >> > e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org> > >> > >> > All emc-pstc postings are archived and searchable on the web at: >> > http://www.ieee-pses.org/emc-pstc.html >> <http://www.ieee-pses.org/emc-pstc.html> >> > >> > Attachments are not permitted but the IEEE PSES Online Communities >> > site at http://product-compliance.oc.ieee.org/ >> <http://product-compliance.oc.ieee.org/> can be used for >> > graphics (in well-used formats), large files, etc. >> > >> > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> >> > Instructions: http://listserv.ieee.org/request/user-guide.html >> <http://listserv.ieee.org/request/user-guide.html> >> > List rules: http://www.ieee-pses.org/listrules.html >> <http://www.ieee-pses.org/listrules.html> >> > >> > For help, send mail to the list administrators: >> > Scott Douglas <emcp...@radiusnorth.net <mailto:emcp...@radiusnorth.net> > >> Mike Cantwell >> > <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > >> > >> > For policy questions, send mail to: >> > Jim Bacher: <j.bac...@ieee.org <mailto:j.bac...@ieee.org> > >> > David Heald: <dhe...@gmail.com <mailto:dhe...@gmail.com> > >> > >> > - >> > ---------------------------------------------------------------- >> > This message is from the IEEE Product Safety Engineering Society >> > emc-pstc discussion list. To post a message to the list, send your >> > e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org> > >> > >> > All emc-pstc postings are archived and searchable on the web at: >> > http://www.ieee-pses.org/emc-pstc.html >> <http://www.ieee-pses.org/emc-pstc.html> >> > >> > Attachments are not permitted but the IEEE PSES Online Communities >> > site at http://product-compliance.oc.ieee.org/ >> <http://product-compliance.oc.ieee.org/> can be used for >> > graphics (in well-used formats), large files, etc. >> > >> > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> >> > Instructions: http://listserv.ieee.org/request/user-guide.html >> <http://listserv.ieee.org/request/user-guide.html> >> > List rules: http://www.ieee-pses.org/listrules.html >> <http://www.ieee-pses.org/listrules.html> >> > >> > For help, send mail to the list administrators: >> > Scott Douglas <emcp...@radiusnorth.net <mailto:emcp...@radiusnorth.net> > >> Mike Cantwell >> > <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > >> > >> > For policy questions, send mail to: >> > Jim Bacher: <j.bac...@ieee.org <mailto:j.bac...@ieee.org> > >> > David Heald: <dhe...@gmail.com <mailto:dhe...@gmail.com> > > > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
