In message <01902c6130f65c4e82278e13908155c62adff...@exchange.alpha.ca>,
dated Fri, 29 Mar 2013, Jose Moreno <jose.mor...@alpha.ca> writes:
If we measure the current and the voltage drop across the bonding
conductor, what difference does it make if we use 12V or 24V?
At the higher voltage, a bad contact could be 'broken down' by
microwelding and give a spurious low resistance reading.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
Which Thunderbird will David Miliband pilot? Or will he drive Lady Penelope?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
