In message
<64D32EE8B9CBDD44963ACB076A5F6ABB026420FB@Mailbox-Tech.lecotech.local>,
dated Fri, 19 Apr 2013, "Kunde, Brian" <[email protected]> writes:
If this rule does apply, can I get around the "makes first and breaks
last" requirement in the connector by putting a warning label near the
connector to "Disconnect Power Before Removing Connector", or something
like that.
Can you run a separate PE bonding conductor between A and B? That way,
you really don't have an issue at all.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
They took me to a specialist burns unit - and made me learn 'To a haggis'.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
