John, Good idea. That might be doable.
The Other Brian -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: Friday, April 19, 2013 2:44 PM To: [email protected] Subject: Re: Makes First, Breaks Last In message <64D32EE8B9CBDD44963ACB076A5F6ABB026420FB@Mailbox-Tech.lecotech.local>, dated Fri, 19 Apr 2013, "Kunde, Brian" <[email protected]> writes: > >If this rule does apply, can I get around the "makes first and breaks >last" requirement in the connector by putting a warning label near the >connector to "Disconnect Power Before Removing Connector", or something >like that. Can you run a separate PE bonding conductor between A and B? That way, you really don't have an issue at all. -- OOO - Own Opinions Only. See www.jmwa.demon.co.uk They took me to a specialist burns unit - and made me learn 'To a haggis'. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
