Thanks John Besides IEC 60044-8. the general transformer standard IEC 61558-1, -2.4 and -2.6
I was also advised to consider EN61869-1:2009 - Instrument Transformers, General Requirements & EN61869-2:2012 - Instrument Transformers, Additional Requirements for Current Transformers. Chris Wells Eaton -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John Woodgate Sent: Thursday, July 18, 2013 9:15 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: Power distribution submetering application - Safety standard for Instrument Current Transformers on mains relative to IEC/EN/UL61010-1 3rd & 61010-2-030? In message <4DA8FE10C88F443E988CA5E66A960CE9@christopher>, dated Thu, 18 Jul 2013, Chris Wells <radioactive55...@comcast.net> writes: >what standard would be best to use to validate/control the CT >production as a separate independent component? There is an IEC standard specifically for current transformers and it does address safety issues. IEC 60044-8. There is also the general transformer standard, of which IEC 61558-1, -2.4 and -2.6 may be applicable. -- OOO - Own Opinions Only. See www.jmwa.demon.co.uk Why is the stapler always empty just when you want it? John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>