In message
<5a54236fdf1041d08021b1d9d55ad...@bn1pr08mb059.namprd08.prod.outlook.com>
, dated Wed, 2 Jul 2014, "Nyffenegger, Dave"
<dave.nyffeneg...@bhemail.com> writes:
I think I’ll just put an additional plate at the second power entry
with only the electrical ratings, put the required labeling about
multiple disconnects at each supply entry, and put the appropriate
installation\disconnect instruction detail in the manual.
Write up what you decided and why in the safety assessment document.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Quid faciamus nisi sit?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
