All, In reviewing IEC 62368-1 Clause 5.4.9.1 the test procedure states about halfway down the page:
"The insulation is subjected to the highest test voltage as follows: - by applying an a.c. voltage of substantially sine-wave form having a frequency of 50 Hz or 60 Hz; or - by applying a d.c. voltage in one polarity for the time specified below and then repeat it in the reverse polarity." Is anyone aware of a piece of test equipment that is capable of providing both polarities for the DC test on the high voltage output automatically or under software control? The equipment we have in our lab only provides a single polarity, positive with respect to ground when in DC mode, which requires us to manually reverse the leads to perform the test. We would like to automate this without requiring the operator to manipulate the test leads. We also do not want an operator to be involved in reversing the leads if we need to perform this as a routine test in manufacturing. Response here or off-line would be greatly appreciated. Gregory H. McClure Lexmark Product Safety 859 232 3240 office 859 232 6882 fax - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>