You'll need translation of some documents, but the test house I use provides that as well.
From: Robert Dunkerley [mailto:robert.dunker...@snellgroup.com] Sent: Friday, August 21, 2015 1:25 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] EMC requirements for Korea Hi all, Thanks for the info. It would be ITE, so I guess KN22/KN24. Under my understanding, these are almost identical to EN55022/EN55024, apart from: -radiated emissions must be tested at 10m, not extrapolated data from 3m - a mains supple of 220V/60Hz must be used - emissions at least a 2dB margin under the limits All the testing done at an accredited RRC test house, then I would imagine a fair bit of paperwork to complete to achieve a KCC mark? Thanks again, Rob. From: Allen, Chris [mailto:chris.d.al...@hp.com] Sent: 21 August 2015 08:02 To: Robert Dunkerley Subject: RE: EMC requirements for Korea Hi Rob, Not sure what your equipment is, but for IT equipment, testing to S. Korean standards at a RRA accredited test house is mandatory. S. Korea does have a MRA in place with the US so there are accredited labs available. Standards are based around CISPR / ETSI standards e.g. KN 22 (CISPR 22) / KN 24 (CISPR 24). Attached is a list of standards and they are all recognizable Nos. The last paragraph in this document does state that other internationally recognized standards can be used but I'm sure that the tests will have to be carried out an accredited test facility. Cheers, Chris. From: Gary McInturff [mailto:gary.mcintu...@esterline.com] Sent: 20 August 2015 18:22 To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] EMC requirements for Korea Brian That has not been my experience in the past with Japan via VCCI. One joins with VCCI as an associate(?) or something and they will then take reports from you, but the labs VCCI registration numbers need to be included. I sent the data and really overnight I had notice that they received it and I was on my way. (presuming this was data within the last 6 months, nobody will take really old data of a year or more) While I found it annoying that I would have to pay to be part of a "voluntary" program I suppose they have to pay the data entry folks, I found the process smooth and seamless. But it has been a few years, and we were talking about ITE equipment without intentional transmitters etc. So things may have morphed. Korean on the other hand - I just don't have anything nice to say about their process and test voltage restrictions. From: Brian Ceresney [mailto:bceres...@delta-q.com] Sent: Thursday, August 20, 2015 9:43 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] EMC requirements for Korea Hi Rob, With regards to your last statement - Japan also will retest EMC at their in-country lab, in spite of an accompanying EMC test report. I suspect that there are other such countries as well. Also, be prepared for a long wait in Korea and Japan, while the testing is done, and results reported. It can take months, and the approvals are not inexpensive. Best Regards, Brian Ceresney ________________________________ Brian Ceresney Regulatory Lead Delta-Q Technologies Corp. My own opions are represented here, not those of Delta-Q Technologies. Phone: +1.604.566.8827 E-mail: bceres...@delta-q.com<mailto:bceres...@delta-q.com> Website: www.delta-q.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.delta-2Dq.com&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=DWHHDX-JCo6B9UxUABv6Pay4ADTcH7CjtTY0pgkSExc&e=> From: Robert Dunkerley [mailto:robert.dunker...@snellgroup.com] Sent: August-20-15 8:19 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] EMC requirements for Korea Hi, Has anyone had experience of the EMC requirements for selling goods to South Korea? There is conflicting information online on what is actually required. I always thought if you had CE and FCC covered, that would pretty much cover you for most of the world? Thanks Rob. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=w5j7CR3y2UuL_4n4c2nXm9za7vfrOkB5LoXSFZo_roA&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=pEe2qUrNx0IQY7hWKFLxszKgYdR7jxcMStwPsi-sh0w&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=PZBGOcSEZYkPNTf3uKEVtFTlYjOUNp5bZw7IEtQGUrk&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=vlmprfp_PvOZ0vgF4QvD-cXIeTm4vL-hIrX3E1tbzNQ&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=xKqw12rCEAP6ZgZwze9lyOKwD7_PaCRlDRA4v5AB3j4&s=DRzm7ndaFbIbhAGDJKMMA0qBwwVEl54TzM4Tlq7uVKk&e=> For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=obKTehrjGvYjDh5xeF6xnGGFgAZwFxVRylNslpU5rog&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=ZDw0V7jPSdfB-2WBTKw5hoasO2ihzF3aZysNCSy6o-w&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=gKbmdrIYwu77ay3RYdniGT5oDUrP1Ptc-IDWf6T5ZZM&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=GawEZyU9fvOCjpcwieZ0plHGHT7MxH6m_BlQ1-AH2sQ&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=QEYfaWVVCMp-KLgsSJzNCwYIcGp-31GuolYNlMDglO4&e=> For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> This email and any attachments are confidential, may be legally privileged and are intended for the use of the addressee only. If you are not the intended recipient, please note that any use, disclosure, printing or copying of this email is strictly prohibited and may be unlawful. If received in error, please delete this email and any attachments and confirm this to the sender. Snell Limited, registered number 1160119 Registered in England, registered office at 31 Turnpike Road, Newbury, Berkshire, RG14 2NX, U.K. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=obKTehrjGvYjDh5xeF6xnGGFgAZwFxVRylNslpU5rog&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=ZDw0V7jPSdfB-2WBTKw5hoasO2ihzF3aZysNCSy6o-w&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=gKbmdrIYwu77ay3RYdniGT5oDUrP1Ptc-IDWf6T5ZZM&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=GawEZyU9fvOCjpcwieZ0plHGHT7MxH6m_BlQ1-AH2sQ&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=AwMFAg&c=0hKVUfnuoBozYN8UvxPA-w&r=RJLDFgHJo89sjFN46b74hFXEuxvz4Z1iAx-glaOgP0k&m=4xZg6jRJXvYXFxAJo4RAluVNZg6UUqBjJnZJmXRvJao&s=QEYfaWVVCMp-KLgsSJzNCwYIcGp-31GuolYNlMDglO4&e=> For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>