Not much reading of machinery safety stuff. Does ISO13849-1 or IEC62061 list ISO12100 as the normative ref for RA?
Per equipment not scoped by machinery directive, what would be rationale of using ISO12100 as basis for presumption of conformity? Thanks, Brian From: Gary Swale [mailto:gary.sw...@ditchwitch.com] Sent: Wednesday, April 13, 2016 5:04 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] SV: [PSES] EU's new approach directive transitions Based on your question, your best bet would be to read ISO 12100 Gary L. Swale Charles Machine Works Product Safety & Compliance 580-572-2448 (office) 580-370-5966 (cell) From: John Allen [mailto:john_e_al...@blueyonder.co.uk] Sent: Wednesday, April 13, 2016 3:15 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] SV: [PSES] EU's new approach directive transitions Rich Sorry but I can't provide such a bibliography as I never had the time to look, but there are masses of documents "out there" if you want to look yourself - and probably many from academics at the various institutions that specialise in safety and risk assessment (e.g. Tim Kelly at York University in the UK comes to mind as he has produced many papers on various aspects of "theoretical studies" of safety, and then there is the Journal of the UK Safety and Reliability Society [SaRS] which I get regularly - and I am sure there are lots of other similar sources of info around the World) John Allen W.London, UK From: Richard Nute [mailto:ri...@ieee.org] Sent: 12 April 2016 18:49 To: 'John Allen'; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: [PSES] SV: [PSES] EU's new approach directive transitions "... hopefully involving some who have had "field" experience of similar products and the HAZARDS that they have faced..." "... become familiar/"comfortable" with what it is trying to achieve and how it is prompting/helping YOU to do it..." Can you provide a bibliography of articles by academics who have studied and written about RA? How would you apply RA to the design of a bridge, for example? Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>