To you guys who have deep experience with Bluetooth test and approvals
according to EN 300 328, are there any of the required tests that is
really hard to fulfil and often fails during tests, and therefore should
have special attention during the development phase?
... or requirements that often lead to discussions because it can have
several interpretations ....
Thanks for all feedbacks!
EN 300 328 requirements:
-RF output power
-Power Spectral Density
-Duty Cycle, Tx-sequence, Tx-gap
-Accumulated Transmit time,Frequency Occupation & Hopping Sequence
-Hopping Frequency Separation
-Medium Utilization (MU) factor
-Adaptivity
-Occupied Channel Bandwidth
-Transmitter unwanted emissions in the out-of-band domain
-Transmitter unwanted emissions in the spurious domain
-Receiver spurious emissions
-Receiver Blocking
-Geo-location capability
Best regards
Amund
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>